Ironing Table Fabric?
#21
Senior Member
Join Date: Jul 2017
Posts: 809
I just made a removable wool cover for my ironing board yesterday! I copied the velcro attachments on my store bought cover and then did some custom ones on the ends.
Fancy end
[ATTACH=CONFIG]617285[/ATTACH]
End when I was getting tired of it
[ATTACH=CONFIG]617286[/ATTACH]
Fancy end
[ATTACH=CONFIG]617285[/ATTACH]
End when I was getting tired of it
[ATTACH=CONFIG]617286[/ATTACH]
#22
Super Member
Join Date: Sep 2011
Location: Carroll, Iowa
Posts: 3,487
My 1st trial for fabric on my big board was a striped ducking fabric but it got stained real quickly when using starch, etc. The 2nd trial I used the silver heat resistent fabric and so far its worked great. Can just wipe off any starch overspray and no stains.
#23
I covered my wood with one of those big black trash bags to avoid moisture in the wood. Then I put one layer of warm and natural batting. Then I added 100% cotton canvas and stapled each layer on the back. then I sprayed the canvas with water from a water bottle several times and the canvas shrunk and pulled really tight. My squares do not stretch when ironing. I had a cotton cover at one time, but it got ugly real quick. I love the canvas.
#24
The above noted is how I did mine as well, however I purchased a wool mat to cover the top of my ironing board, and made a couple of large "pillow slips" from a king size sheet - so I could slip the wool mat inside, and when it became discolored from my ironing, then I could exchange it with the second one. I purchased my wool mat from a carpet store, 3/8" thick - 24" x 60" to fit my ironing board, and laid it on top - what a difference it made in my pressing and ironing, and less than the cost at our local quilt shops.
#25
I really appreciate all the helpful comments and ideas! I am definitely using the ironing board fabric from JoAnns and cotton batting. Have to decide about the aluminum foil - is it still needed with that fabric? I would have to tape it to reach my width and would the tape create an issue with the heat or moisture? I will wait and see how I like the look of that fabric before deciding whether to add another layer over it . The fabric is called silver but looks dark gray online (I pick up tomorrow to see in person) so the colors might work as is. Zozee, I think my color palette will be very close to yours! I am sharing the space with my grandkids sleeping space (for visits only) and I made a crib quilt for my grandson in light aqua, yellows, grays and some black and white accents, lol. The walls are a light blue/aqua as well. I also love the idea of stripes for a straight ironing line but I'm afraid pulling it to staple would make the lines wavy and it would drive me nuts. I might do as I saw someone comment online and just draw a long straight line on whatever fabric I have, to use to true up my fabric and blocks. Oh, the possibilities! I just wish I didn't work full time so I could get this made ! :-)
#26
Super Member
Join Date: May 2017
Location: Sunny Florida
Posts: 4,431
I use a piece of plywood cut 24x24. Cover with a layer of insulbrite that is cut about 23.5x 23.5 to avoid bulk on edges. Cut the silver iron fabric at 32 x 32. I hot glued cabinet cushion to plywood back. Then wrap the the silver fabric. I used straight pins to hold.
For a straight edge, I use a 48 inch metal carpenter ruler. No need to draw lines.
For a straight edge, I use a 48 inch metal carpenter ruler. No need to draw lines.
#27
Super Member
Join Date: Mar 2010
Location: Anchorage, AK
Posts: 1,397
You need a heat/moisture barrier of some kind added, like the silver heat resistant fabric, or the plywood will warp. Seen it happen to many a nice wood ironing surface. I like duck canvas to cover whatever padding I use. I make a muslin easy off top covering over that so it's easy to replace or wash. I now use a portable wool pressing pad on top.
#29
Member
Join Date: Aug 2019
Location: The beautiful San Gabriel foothills, So. Cal
Posts: 71
If you don't want extra thickness, use a clear spray sealer on the plywood before covering with your fabric choice. I generally use the clear sealer from Krylon but there are other brands that work well.
#30
Matt, from Jordan fabrics has a great tutorial on how to do an ironing tablecover. I used Kaffe Facet fabric, followed the directions in Matt's tutorial and haven't any problems. I did use 3/4 inch "blonde" or also called cabinet grade plywood.
Thread
Thread Starter
Forum
Replies
Last Post
AngelinaMaria
Main
46
08-21-2013 09:54 AM
craftybear
Links and Resources
15
04-07-2013 02:59 AM
craftybear
Links and Resources
14
11-28-2010 09:07 AM