Newbie Question: How worried should I be about 1/4-inch?
#53
Something to think about when "fudging" is that you will end up with weaker
seams. One or two threads short might be ok but anything more...you're
going on the dark side...unless you do a lot of stippling in that area to stabilize the seam.
seams. One or two threads short might be ok but anything more...you're
going on the dark side...unless you do a lot of stippling in that area to stabilize the seam.
#54
Super Member
Join Date: Jan 2010
Location: Some where in way out West Texas
Posts: 3,041
Originally Posted by JenelTX
Thank you so much, everyone! I hadn't even thought of ripping out the seam to see where I went wrong. I'll do that, as a learning experience. I think it happened because I slipped with the rotary cutter when I got to the top of that piece, so it was a little smaller. Then I forgot to adjust for that when sewing the seam, so it ended up too small.
I really, REALLY had a lot of fun today!
I really, REALLY had a lot of fun today!
But accuracy in CUTTING is of GREAT importance, and so is sewing the 1/4 inch. However this being said, if it is cut accurately, then it is easier to fix if it is sewn with measurement other than 1/4 inch. Since this is your first quilt, you will now have a good learning experience, with block measurements. ENJOY making the rest of your first quilt and be sure to show us pics. along the way or at least when it is finished please. Have Fun on this new journey ((Hugs))) Gerbie
#55
Super Member
Join Date: May 2007
Location: Illinois
Posts: 3,474
Originally Posted by DogHouseMom
At first I worried more about consistancy of my seam allowances than I did exactly what measurement they were. Consistancy is far more important.
As for the one block, don't throw it away. Rip it apart, figure out where your error was and fix it. It may have been in cutting, it may have been in stitching.
We learn by ripping :)
As for the one block, don't throw it away. Rip it apart, figure out where your error was and fix it. It may have been in cutting, it may have been in stitching.
We learn by ripping :)
#56
The first thing I always tell new quilters is to be very carefull to get exact measurements always, a small bit out in a block will add up to a large bit in a quilt. In the end it makes life easier to take the trouble to measure twice and cut once. Hope this helps. :-)
#57
Super Member
Join Date: Feb 2010
Location: Winchester, Tn.
Posts: 1,522
My DGD is learning to sew and I told her to try to keep all her seams the same. I put several layers of painters tape to help her quide the fabric and she said it helped. My problem always seems to be the cutting. I always seem to get one stack of parts a little smaller or bigger than the rest.
#59
Super Member
Join Date: Dec 2006
Location: NW Wa
Posts: 1,549
Thread
Thread Starter
Forum
Replies
Last Post
janecat
Main
1
12-02-2015 09:23 PM
AngelinaMaria
Main
5
03-31-2013 01:19 PM
MistyMarie
General Chit-Chat (non-quilting talk)
44
03-25-2013 12:41 PM
Favorite Fabrics
General Chit-Chat (non-quilting talk)
64
11-01-2010 08:04 AM