What's the best way to use a cone of thread?
#1
What's the best way to use a cone of thread?
I've ordered some thread on a cone for the very first time. My machine (Janome Magnolia 7330) does not have a way to use a cone & I know others have rigged up things on their machines to handle cones. I would love to hear how you deal with cones & most of all would really like to see pictures as to what method you use to sew with cones if you machine is not equipped for them. Thanks!
#3
Super Member
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,504
This is what I've done. When I quilted my string quilt, I used a cone. My Juki is set up to pull the thread from up above but I had a bit of trouble with this cone at first. The thread would slip down and under the cone and, of course, cause problems. I solved them by taking on of the nets that Spec's gives you with wine bottles and put it over the cone running the end of the thread up and out the top. Worked like a charm! Now I just have to see if I have any more of those nets. Since I've found a use for them I don't want to throw them out. I don't buy enough wine since our dinner group fell apart to buy more than one bottle of wine at a time now.
#4
I also bought a cone stand. Superior has a good price on one. https://www.superiorthreads.com/thread-stand-metal
#5
Power Poster
Join Date: Jan 2011
Location: Southern USA
Posts: 15,916
Get a good quality one. Heavy and solid. Nothing worse then a flimsy thread holder. I have been given several wooden ones and they are aggravating to use. I like the Superior one and the one from Connecting Threads.
#6
Super Member
Join Date: Mar 2013
Location: Southern Indiana
Posts: 3,111
I have a cone stand... and I will never buy thread again not on a cone I have the superior brand thread stand
https://smile.amazon.com/Superior-Th...s=thread+stand
https://smile.amazon.com/Superior-Th...s=thread+stand
#7
Super Member
Join Date: May 2017
Location: Sunny Florida
Posts: 4,422
I use a thread stand as shown by Dunster too. I hot glued some felt on the bottom to cushion it. You could also use cabinet cushion cut to size.
Don't put it behind the machine where it can get tangled in the hand wheel. It happened to someone at our LQS and was a mess.
Don't put it behind the machine where it can get tangled in the hand wheel. It happened to someone at our LQS and was a mess.
#10
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,460
[ATTACH=CONFIG]603412[/ATTACH]I have this in the trunk of my car in case I forget a cone holder when going away to sew. I cut a hole in the side of a large pop bottle big enough to put the cone through. The cone sites on the bottom of the bottle and the thread is put up through the hole which acts as a top thread guide.
Thread
Thread Starter
Forum
Replies
Last Post
suspendedglass
Main
19
06-30-2019 05:34 PM
Chester the bunny
Main
9
03-10-2014 05:28 AM