Question that's been bugging me...
#21
Junior Member
Join Date: Apr 2011
Location: Spencer, OH
Posts: 283
I use a lot of starch.....and have quilting retreats with 8 other women who all use starch. I take a wet rag (just "normal" wet....not "soaking" wet) and wash the top of my ironing board. (and the windows and wall behind it ggg> Works great and lots easier than taking it off or replacing it so often.
#23
Like masufa, I took mine to my utility sink, using liquid detergent soaped it up good and used a scrub brush gently here and there, rinsed it really well, used towels to "soak" up some of the moisture and let it air dry. Didn't hurt it at all and sure made it look 100% better.
#25
Super Member
Join Date: Jul 2010
Location: Lebanon Missouri
Posts: 2,668
I take mine off and soak in the kitchen sink with a little dish soap over night. In the morning I rinse the daylights out of it-hang it on a hanger to dry. This way it doesn't shrink or get twisted out of shape from the washing machine. Once its on the board again the wrinkles that are left are pressed out. Saves me time on always making a new one.
#26
Junior Member
Join Date: Aug 2008
Location: Texas
Posts: 195
That is one of those "why didn't I think of that" times. Great idea. I will use this one.
#27
I took a 24x24 board from the hardware store, wrapped it with a thick towel (beach size) and made pillowcase-style cover for it. When it gets too overstayed, I just slip off the cover and towel and wash it with the rest of the laundry.
I made sure the cover was a colorfast fabric (used some pretty leftover fabric), and that it fit snug. Makes a very nice area to press plus it is not too big that I can't slid it into a small space in my motor home, allowing me to have a nice pressing board while on the road.
I made sure the cover was a colorfast fabric (used some pretty leftover fabric), and that it fit snug. Makes a very nice area to press plus it is not too big that I can't slid it into a small space in my motor home, allowing me to have a nice pressing board while on the road.
#29
Super Member
Join Date: Dec 2010
Location: Dallas area, Texas, USA
Posts: 3,050
If you mean one of those portable ironing mats that have a foam rubber pad on the underside, I have the same problem exactly and sometimes wipe it off with a damp terry wash rag. The gunk loosens up more easily if it's still warm from the iron.
I wanted to mention that the bigger problem with using starch or even just steam on one of those pads is that if you're doing quite a bit of ironing it's not as heat proof as I once thought. I had it overlapping my biggest and best cutting mat on a table and found that it didn't protect my mat from getting a little damaged from heat. You most certainly would not want to use one of these pads on a good table. Still, I like the size and shape of it and the fact that I can roll it up to take with me. I put two layers of Insul-brite under it to increase the protection, and I no longer let it anywhere near my cutting mats.
I'm curious about people using spray starch on the little reversible mats. I have a mat like that in the most common size, which is about 13" square. I have tried it and find that it's too small and starch gets out beyond it and all over everything. The foam-backed mat is about 22" X 28".
I wanted to mention that the bigger problem with using starch or even just steam on one of those pads is that if you're doing quite a bit of ironing it's not as heat proof as I once thought. I had it overlapping my biggest and best cutting mat on a table and found that it didn't protect my mat from getting a little damaged from heat. You most certainly would not want to use one of these pads on a good table. Still, I like the size and shape of it and the fact that I can roll it up to take with me. I put two layers of Insul-brite under it to increase the protection, and I no longer let it anywhere near my cutting mats.
I'm curious about people using spray starch on the little reversible mats. I have a mat like that in the most common size, which is about 13" square. I have tried it and find that it's too small and starch gets out beyond it and all over everything. The foam-backed mat is about 22" X 28".
Thread
Thread Starter
Forum
Replies
Last Post
Panther Creek Quilting
General Chit-Chat (non-quilting talk)
14
02-06-2010 02:35 PM
zyxquilts
General Chit-Chat (non-quilting talk)
16
01-01-2010 04:41 AM