Ruler Quilting - questions and discussion!
#21
Junior Member
Join Date: Jul 2013
Posts: 158
I bought the Westalee ruler foot when it first came out- used it for several years and it worked just fine for me, but it was tiresome to adjust it's height whenever I needed to go over a thicker area in a quilt (like where multiple seams come together). When the Janome convertible FMQ and frame sets became available, I switched to them because there is a thumb screw on the convertible foot which allows you to fine tune the height of the floating foot without loosening the screw that mounts the foot to the machine--- the reason that this adjustability is important is that with a floating foot, you need to get the foot at exactly the right height above the quilt to get good stitch formation. The Westaleee foot and the other feet available (except for the Janome) all are adjusted by loosening the screw that attaches them to the machine and then sliding the foot slightly up or down, then re-tightening the screw. This means that you are essentially taking time to re-mount the foot every time you need to adjust it's height. With the Janome, the thumbs screw is completely independent of the screw that mounts the foot to your machine-- well worth the extra $ if you do a lot of ruler work and/or work on quilts that have areas where multiple seams come together resulting in thicker spots here and there.
Rob
Rob
#22
Junior Member
Join Date: Jul 2013
Posts: 158
I do mainly straight line ruler work with fill? Check out Judi Madsen's work on greenfairyquilts.com or on Pinterest she does some beautiful work using just a simple 9" ruler that has a perfect handle on it. It is by far my favorite ruler. Her work is mainly straight line designs with fills and it is how I got started on ruler work. Way way easier than it looks.
#23
Senior Member
Join Date: Dec 2016
Location: Upstate SC
Posts: 683
Thanks for your clarification, wouldn't want anyone to get confused by my comments.
And thanks for your explanation on how the Janome ruler foot differs from the others on the market. I wondered about that too.
Happy Quilting
Murphy
#24
Senior Member
Join Date: Dec 2016
Location: Upstate SC
Posts: 683
Kassandra: Be sure to get a quilting ruler specifically designed for ruler work to try quilting with rulers. The quilting rulers are thicker so they rest against the thicker edge of the ruler foot. Otherwise the ruler will slip under the foot and break your needle not to mention what else could happen to your machine. The Creative Grid ones mentioned in this thread are on Amazon for 21.99 each. Like you, I don't want a lot of money tied up in this "try it idea".
#25
Thanks for the warning, I often try "make do" ideas, I did understand the normal thickness of rulers were not a good idea to use (no matter how tempting). I was thinking about having a look in the crafting / kids section of my local big box store to see if they had something cheap w/ the appropriate thickness to try it out since the designed rulers are basically $25 and up.
Kassandra: Be sure to get a quilting ruler specifically designed for ruler work to try quilting with rulers. The quilting rulers are thicker so they rest against the thicker edge of the ruler foot. Otherwise the ruler will slip under the foot and break your needle not to mention what else could happen to your machine. The Creative Grid ones mentioned in this thread are on Amazon for 21.99 each. Like you, I don't want a lot of money tied up in this "try it idea".
#27
I bought the Westalee ruler foot when it first came out- used it for several years and it worked just fine for me, but it was tiresome to adjust it's height whenever I needed to go over a thicker area in a quilt (like where multiple seams come together). When the Janome convertible FMQ and frame sets became available, I switched to them because there is a thumb screw on the convertible foot which allows you to fine tune the height of the floating foot without loosening the screw that mounts the foot to the machine--- the reason that this adjustability is important is that with a floating foot, you need to get the foot at exactly the right height above the quilt to get good stitch formation. The Westaleee foot and the other feet available (except for the Janome) all are adjusted by loosening the screw that attaches them to the machine and then sliding the foot slightly up or down, then re-tightening the screw. This means that you are essentially taking time to re-mount the foot every time you need to adjust it's height. With the Janome, the thumbs screw is completely independent of the screw that mounts the foot to your machine-- well worth the extra $ if you do a lot of ruler work and/or work on quilts that have areas where multiple seams come together resulting in thicker spots here and there.
Rob
Rob
Rob - - thanks for this explanation! I've been very happy with the quality of the Janome brand and I guess this is an instance that you get what you pay for......now I just need to decide when I can pay for it!
#28
Luckily I already had the Free motion quilt foot set, so I only had to order the ruler foot, so glad I did as this is so much fun and really helps with my free motion quilting. Try it, you won't be sorry
KrisP thanks for the input and Murphy224 I will be interested in hearing how it goes for you.
I'm rather bummed at how much the ruler foot costs for my machine! If I understand correctly, for my Janome 6600 I need to get the Janome Convertible Free Motion Quilt Foot Set for High Shank Models at $54.99 and the Janome Convertible Free Motion Frame Quilting Feet Setfor $20.99.. So, $78 before I even get a ruler! That's a tough one to justify right now. Has anyone tried the other brand name feet?
I'm rather bummed at how much the ruler foot costs for my machine! If I understand correctly, for my Janome 6600 I need to get the Janome Convertible Free Motion Quilt Foot Set for High Shank Models at $54.99 and the Janome Convertible Free Motion Frame Quilting Feet Setfor $20.99.. So, $78 before I even get a ruler! That's a tough one to justify right now. Has anyone tried the other brand name feet?
#29
The first ruler I bought was the Westerlee meander template and I really like it, its a good starter one, they have videos of it being used.More of these rulers are coming on the market now and I think this is an exciting next step for me to improve my quilting skills. I also have a Janome 6600 and you do need their free motion foot to be able to use their ruler foot
I've watched a few questions about ruler quilting and I think I am ready for the next step to my quilting. I work on a domestic machine, Janome 6600, not a long arm. I was especially interested in the Creative Grids rulers - Shorty, Slim, Archie, Squiggy, etc.
Currently for quilting I do stitch in the ditch, straight lines using that metal bar thingy to follow lines already made and I do a free motion stipple. I've also done some free hand echo quilting. On one quilt I used a stencil which went ok, but not as easy as I thought!
If I were to start with one ruler which would you suggest? The Shorty and Slim look so similar, that I'm tempted to get the Slim for the extra length. I will admit the rulers with all the curves and circles call to me as well, but I'm thinking I should get the basics down first.
So please share your experience and tips! Thanks!
Currently for quilting I do stitch in the ditch, straight lines using that metal bar thingy to follow lines already made and I do a free motion stipple. I've also done some free hand echo quilting. On one quilt I used a stencil which went ok, but not as easy as I thought!
If I were to start with one ruler which would you suggest? The Shorty and Slim look so similar, that I'm tempted to get the Slim for the extra length. I will admit the rulers with all the curves and circles call to me as well, but I'm thinking I should get the basics down first.
So please share your experience and tips! Thanks!
#30
This last January Patsy Thompson posted a series of ruler work classes on her blog. They were great. Especially for a beginner (me) you can find her at http://Patsythompsondesigns.com
Thread
Thread Starter
Forum
Replies
Last Post
IBQUILTIN
General Chit-Chat (non-quilting talk)
10
07-10-2015 09:59 AM
lindamar
Main
18
09-20-2011 06:50 AM
craftybear
Links and Resources
3
08-08-2011 09:23 AM