Starching or Sizing??? any suggestions??
#21
Power Poster
Join Date: Oct 2009
Location: Idaho
Posts: 11,375
Originally Posted by Scissor Queen
Originally Posted by magpie
Vodka is made by the process of distillation of a fermented substance--often potatoes and rye or wheat grain--and less often, sugar beet molasses. Most vodka was traditionally made from potatoes and corn, but in recent years, most high-quality brands of vodka has been distilled from cereal grains. The potatoes and grains are heated until the starch is released and converted to sugar. Then this substance, called a mash, is fermented and heated to a high temperature to allow distillation to occur. The substance is then distilled multiple times until all of the spirit is extracted. Multiple distillations allow for a higher proof. Water is added at the end of the distillation process to decrease the alcohol content, and then the vodka is ready to be bottled and sold
Read more: How Is Vodka Made? | eHow.com http://www.ehow.com/how-does_4574426...#ixzz1819rTKeL
Read more: How Is Vodka Made? | eHow.com http://www.ehow.com/how-does_4574426...#ixzz1819rTKeL
#22
I make my own starch. In a large bowl or pot, stir 1/2 cup cornstarch into
1 cup of cold water. Stir in boiling water (2 quarts for heavy solution;
4 quarts for medium and 6 quarts for light solution).
If you only need a small amount then half or quarter above quantities.
Sometimes I add a bit more water for the heavy solution as it gets
a bit too thick. You can try and adjust as you wish.
When the cornstarch solution is cool, I use a paintbrush to apply it on
my fabric (stir the solution often or shake if it's in a spray bottle).
Let is soak for at least 30 mins. If I don't have time to iron
I just put everything in a ziploc and put it in the fridge for the next day.
If it's too wet I roll the fabric in a towel first and iron on the wrong side
with a cloth on top so that the starch doesn't stick to my iron. When
the heat has absorbed most of the humidity then I continue to iron
without the cloth. Hope this helps.
By the way, I finally tried Mary Ellen's Best Press. I wasn't too impressed.
It's ok for small jobs. I think I'll keep using my cornstarch mixture. :-D
1 cup of cold water. Stir in boiling water (2 quarts for heavy solution;
4 quarts for medium and 6 quarts for light solution).
If you only need a small amount then half or quarter above quantities.
Sometimes I add a bit more water for the heavy solution as it gets
a bit too thick. You can try and adjust as you wish.
When the cornstarch solution is cool, I use a paintbrush to apply it on
my fabric (stir the solution often or shake if it's in a spray bottle).
Let is soak for at least 30 mins. If I don't have time to iron
I just put everything in a ziploc and put it in the fridge for the next day.
If it's too wet I roll the fabric in a towel first and iron on the wrong side
with a cloth on top so that the starch doesn't stick to my iron. When
the heat has absorbed most of the humidity then I continue to iron
without the cloth. Hope this helps.
By the way, I finally tried Mary Ellen's Best Press. I wasn't too impressed.
It's ok for small jobs. I think I'll keep using my cornstarch mixture. :-D
#23
Senior Member
Join Date: Jul 2008
Location: Kansas City area USA
Posts: 421
Originally Posted by eaglebeak1960
Originally Posted by jodimarie
I am not a pre-washer....my choice....but I am a firm believer in using Magic sizing on EVERYTHING before I cut a strip or square. I spray on a pretty good amount onto the peice of fabric that I'm getting ready to cut, not wet but dampish and then hot iron in every direction I care to go. Nothing easy, I use a hot iron and go to town onto that piece of fabric. In 30 years of quilting, I've never had a top shrink more than th 1-2 percent you find after the first washing and drying when finished before using.
I buy Magic sizing at WalMart for less that $1.00 a can and it will last through about 2 quilts. I also use it to press blocks and to press the entire quilt top before starting the sandwiching process.
jodi in leavenworth
I buy Magic sizing at WalMart for less that $1.00 a can and it will last through about 2 quilts. I also use it to press blocks and to press the entire quilt top before starting the sandwiching process.
jodi in leavenworth
that is what I was/am having a problem with Magic SIzing gummed up everthing.
Occasionally I will have a piece of fabric ''stick'' to the board. I just ''peel'' it up, repray and iron again. I use the June Taylor pressing boards and not a big regular ironing board and I do designate one pressing board for ''spray use''. I would guess it lasts about 2 years or so before it is shinny and slick....from all the spray build up but for about 8.00 at JoAnns when quilting notions are half off, I figure that is a small price to pay for the great results that I get from Magic spray sizing. I would NOT quilt with out it and buy a case at a time, so I never fun out!!
jodi in leavenworth
#24
You can drape a sheet or other press cloth over your ironing board before you press. Then spray the fabric and let the sizing or starch soak in a bit. You can even let it dry. Then simply wash the press cloth when you are finished.
I just take off the ironing board cover and wash it when it gets too sticky or dirty. lol
You can also clean the iron be ironing over a paper bag or piece of wax paper. Or, you can buy drops to clean the plate of your iron at most stores in the laundry aisle.
Or, use the Mary Ellen's. It smells wonderful.
I just take off the ironing board cover and wash it when it gets too sticky or dirty. lol
You can also clean the iron be ironing over a paper bag or piece of wax paper. Or, you can buy drops to clean the plate of your iron at most stores in the laundry aisle.
Or, use the Mary Ellen's. It smells wonderful.
#25
Originally Posted by Scissor Queen
Originally Posted by eaglebeak1960
Originally Posted by Scissor Queen
Use "Mary Ellen's Best Press."
#27
Originally Posted by EasyPeezy
I make my own starch. In a large bowl or pot, stir 1/2 cup cornstarch into
1 cup of cold water. Stir in boiling water (2 quarts for heavy solution;
4 quarts for medium and 6 quarts for light solution).
If you only need a small amount then half or quarter above quantities.
Sometimes I add a bit more water for the heavy solution as it gets
a bit too thick. You can try and adjust as you wish.
When the cornstarch solution is cool, I use a paintbrush to apply it on
my fabric (stir the solution often or shake if it's in a spray bottle).
Let is soak for at least 30 mins. If I don't have time to iron
I just put everything in a ziploc and put it in the fridge for the next day.
If it's too wet I roll the fabric in a towel first and iron on the wrong side
with a cloth on top so that the starch doesn't stick to my iron. When
the heat has absorbed most of the humidity then I continue to iron
without the cloth. Hope this helps.
By the way, I finally tried Mary Ellen's Best Press. I wasn't too impressed.
It's ok for small jobs. I think I'll keep using my cornstarch mixture. :-D
1 cup of cold water. Stir in boiling water (2 quarts for heavy solution;
4 quarts for medium and 6 quarts for light solution).
If you only need a small amount then half or quarter above quantities.
Sometimes I add a bit more water for the heavy solution as it gets
a bit too thick. You can try and adjust as you wish.
When the cornstarch solution is cool, I use a paintbrush to apply it on
my fabric (stir the solution often or shake if it's in a spray bottle).
Let is soak for at least 30 mins. If I don't have time to iron
I just put everything in a ziploc and put it in the fridge for the next day.
If it's too wet I roll the fabric in a towel first and iron on the wrong side
with a cloth on top so that the starch doesn't stick to my iron. When
the heat has absorbed most of the humidity then I continue to iron
without the cloth. Hope this helps.
By the way, I finally tried Mary Ellen's Best Press. I wasn't too impressed.
It's ok for small jobs. I think I'll keep using my cornstarch mixture. :-D
Thread
Thread Starter
Forum
Replies
Last Post
Julie in NM
Pictures
22
09-11-2011 07:03 AM
craftybear
Links and Resources
0
06-03-2010 01:18 PM