Go Back  Quiltingboard Forums >
  • Main
  • Feed dogs and the 1/4" seam >
  • Feed dogs and the 1/4" seam

  • Feed dogs and the 1/4" seam

    Thread Tools
     
    Old 07-06-2018, 04:52 AM
      #1  
    Super Member
    Thread Starter
     
    Join Date: Jan 2016
    Location: West Bend, WI
    Posts: 2,229
    Default Feed dogs and the 1/4" seam

    Okay, I have issues sewing a decent 1/4" seam. When I place the fabric to the needle, the 1/4" mark only hits the left feed dog, not the right, so it "pulls" funny.

    Is this normal? I just think the fabric would feed better if both sides of the dog were feeding at the same time.

    Thoughts?
    redstilettos is offline  
    Old 07-06-2018, 05:37 AM
      #2  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    Interesting. What brand and model of machine do you have? Can you move your needle position?
    PaperPrincess is offline  
    Old 07-06-2018, 05:41 AM
      #3  
    Super Member
     
    Join Date: May 2017
    Location: Sunny Florida
    Posts: 4,431
    Default

    What foot are you using on your machine? There are different ones with the 1/4 inch guide that help with those pesky seam allowance issues.

    Can you show us a picture please?
    Rhonda K is offline  
    Old 07-06-2018, 05:59 AM
      #4  
    Super Member
     
    Join Date: Jun 2008
    Location: Utah
    Posts: 8,847
    Default

    I had that problem with my 1/4 inch foot so I experimented with different feet and needle positions until I found what works for me.
    quiltsRfun is offline  
    Old 07-06-2018, 06:26 AM
      #5  
    Power Poster
     
    Join Date: Jan 2011
    Location: Southern USA
    Posts: 16,401
    Default

    I had the same problem with a newer machine with the wide feed dogs. Drove me nuts. I found a foot that was wide enough to fit over both feed dogs with the needle moved to the right that gave me the 1/4" inch. It was the plastic foot that came with the machine that I never thought to use. I still wonder why a plastic foot in with all the metal ones.
    Onebyone is offline  
    Old 07-06-2018, 07:37 AM
      #6  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,538
    Default

    Bonnie Hunter loves the old straight stitch machines because the feed dogs are right under the foot. On newer machines the 1/4 foot can cause the problem you are having. If you can move your needle position that might help. You might also try Bonnie Hunter's seam guide trick on the right side of the machine bed to give you a fabric guide. She uses a command strip and a section of a plastic card stuck her machine bed. If you go to her site, it is under Best Machine Guide Ever I think.
    Tartan is offline  
    Old 07-06-2018, 08:06 AM
      #7  
    Super Member
     
    Join Date: Mar 2010
    Location: Ridgefield WA
    Posts: 7,765
    Default

    I like my plastic foot! I can "see" through it to help line up, etc.

    Like many others my 1/4" seam is perfect if I line up my fabric just at the left edge of the right feed dog. so far with the IDT on my Pfaff it isn't a problem but I certainly would prefer if both feed dogs were in use!

    Last edited by Kitsie; 07-06-2018 at 08:09 AM.
    Kitsie is offline  
    Old 07-06-2018, 08:28 AM
      #8  
    Power Poster
     
    Join Date: Jan 2011
    Location: Southern USA
    Posts: 16,401
    Default

    The plastic foot that was with my metal feet is white, not clear, plastic. If you use your machine primarily for piecing be sure before you buy one you can get a 1/4 seam with both feed dogs under the foot.
    Onebyone is offline  
    Old 07-06-2018, 08:33 AM
      #9  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    Originally Posted by Onebyone
    The plastic foot that was with my metal feet is white, not clear, plastic. If you use your machine primarily for piecing be sure before you buy one you can get a 1/4 seam with both feed dogs under the foot.
    the white plastic foot is Teflon for sewing vinyl, plastic etc. But you can use it for anything!
    PaperPrincess is offline  
    Old 07-06-2018, 09:20 AM
      #10  
    Power Poster
     
    Join Date: Jan 2011
    Location: Southern USA
    Posts: 16,401
    Default

    Originally Posted by lyric girl
    A 5.5 mm machine would fix that problem.
    Most newer machines have the 7 mm for larger decorative stitches. Even the ones promoted for quilters. Something I didn't really think about. Unless it has a 1/4" foot that fits over the feed dogs it is a frustration. My old trusty Bernina is still going strong with the 5 mm width.
    Onebyone is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    bearisgray
    General Chit-Chat (non-quilting talk)
    65
    02-01-2024 09:04 AM
    salederer
    Main
    11
    02-25-2017 03:23 AM
    nuevaquilter
    Main
    4
    07-21-2012 04:34 PM
    Mad Mimm
    Main
    10
    02-08-2012 01:00 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter