Will the Real 15 clone please stand up
#191
Power Poster
Thread Starter
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I would say there is at least equal opportunity for them to work well. Some have larger 'harp' or 'throat' area than others. Some are in better condition for their age than others. I've seen some turn easier than others.
#193
Power Poster
Thread Starter
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
#194
Super Member
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
If I wanted it, it wouldn't be too much, but I'm satisfied with my pretty black MW and my gorgeous black Admiral. Whoops, the Admiral isn't a 15 clone because the tension is on the front. I have the bright turquoise and white Universal for color.
#195
OK, looking at Muv's video, I see the tension spring wire on the 15 is going out toward the front of the machine, not toward the back. If you look at the mechanism from the face of the machine, the wire goes to the right, not to the left like a poster put a pic of earlier.
This thread has helped me learn a ton. My Morse 300 B-L is SO quiet and consistent. Without the help of everyone here, I would have written it off as a lesson learned. <3
#196
Power Poster
Thread Starter
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
This manual is really helpful: http://www.tfsr.org/publications/tec...achine_manual/ They did a really good job writing this one. I love it I live by it when I've got something on the bench. Go through it word by word, step by step and you can fix a tension. I had a couple 15 machines that I had to rebuild the tensions. It was tricky getting them fussed out but with the help of that manual I did it. One needed a new spring the other needed the old spring free of oil and gunk. I do not know why anybody would ever use 3 in 1 oil...
#198
Power Poster
Thread Starter
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
It is good to have help. My sister comes up from AZ a couple times a year - I save up machines to work on for when she comes - it's how we do it.
#199
Here is my Morse 300 B-L circa June 1958. That is the date stamped into the motor badge. As far as I can tell the B-L is the addition of the gauge to show stitch length. It came with a Morse Attachments box full of Greist attachments, some of which use a strange adapter to attach, and a gorgeous buttonholer with all the cams.
[ATTACH=CONFIG]352963[/ATTACH]
[ATTACH=CONFIG]352964[/ATTACH]
[ATTACH=CONFIG]352963[/ATTACH]
[ATTACH=CONFIG]352964[/ATTACH]
#200
I just started piecing with my Morse 300 B-L and words cannot express my amazement. At first, I thought, "There is something wrong! The needle isn't threaded. The bobbin thread has broken. This is too smooth!" Then I realized, the machine was doing exactly what it was designed to to- Sew smoothly and cleanly with a minimal amount of extra effort or movement.
Sewing with my Morse is like stitching through butter...
Sewing with my Morse is like stitching through butter...
Thread
Thread Starter
Forum
Replies
Last Post
OurWorkbench
For Vintage & Antique Machine Enthusiasts
106
03-14-2016 04:40 PM
olebat
For Vintage & Antique Machine Enthusiasts
14
04-06-2013 03:54 PM