Rotary Cutters- ARE they all created Equal??
04-13-2011, 12:00 PM
#92
Senior Member
Join Date: Jan 2007
Location: Mississippi
Posts: 452
Originally Posted by #1piecemaker
I need a new rotary cutter. I've been using one I purchased at Walmart and it just doesn't cut very good. I'm constantly having to go back and cut threads. Which one do you like best and why?
04-13-2011, 12:17 PM
#95
Senior Member
Join Date: Dec 2010
Location: Northwest Texas
Posts: 442
Originally Posted by BKrenning
Originally Posted by TonnieLoree
Originally Posted by BKrenning
I have Olfa's--all sizes that close automatically when you release the handle except for the tiny one--it is manual; a few dollar bin cheapos that I use for fleece & paper and a Martelli 45mm. I love, love, love the Martelli for long cutting sessions but you have to remember to close the blade shield every time you set it down. Also, it only likes the blades without notches or it will wobble. There is a right & left hand version so make sure you get the correct one for you.
So, no, they are not made equal. You have to find one that is comfortable for you at a price you're willing to pay. For a good all around--easy & cheap to find blades for--I would recommend Olfa. For problems with carpal tunnel or hand strength--I recommend Martelli. For pretty--I recommend Donna Dewberry!
So, no, they are not made equal. You have to find one that is comfortable for you at a price you're willing to pay. For a good all around--easy & cheap to find blades for--I would recommend Olfa. For problems with carpal tunnel or hand strength--I recommend Martelli. For pretty--I recommend Donna Dewberry!
http://www.martellicatalog.com/mm5/m...tegory_Code=RC
04-13-2011, 01:52 PM
#96
Junior Member
Join Date: Jun 2010
Location: Missouri
Posts: 155
I have the new Tru Cut electric rotary blade sharpener.
It works fine. Except it doesn't take out the nicks.
It does extend the life of the blade as long as the blade just needs a touch of sharpening.
To the post that said after sharpening the blade there were still threads that had to be clipped. That means there is a nick in the blade and no sharpening will take it out.....
Toss the blade.[/quote]
It does not always mean a nick in the blade, maybe it is a bad mat. Sometimes when your mat gets used so much it does not heal it will leave a negligible groove and when you cut across it it will leave uncut threads.
I have used a Martelli cutter for the last 8 years and wouldn't trade it for anything else. When I put a new blade in I can cut 20 layers easily. I have to step down to about 12-14 layers when the blade gets used a lot.
These cutters are true ergonomic cutters and for anyone with arthritis, carpel tunnel, or hand fatigue they can't be beat. They even take the strain off a bad shoulder because you don't have to put your elbow out to the side and cut at 45 degrees.
You cut with the normal swing of your arm at 90 degrees straight out from your body. Since you have better control of the cutter straight out, there is less chance of veering off the side when cutting. The 45 degree cutters cost about $25.00 which is less than the new quick change Olfa cutters which run $30.00. I a real fan. I have both the 45mm and the 60mm cutters.
OzarksGma
It works fine. Except it doesn't take out the nicks.
It does extend the life of the blade as long as the blade just needs a touch of sharpening.
To the post that said after sharpening the blade there were still threads that had to be clipped. That means there is a nick in the blade and no sharpening will take it out.....
Toss the blade.[/quote]
It does not always mean a nick in the blade, maybe it is a bad mat. Sometimes when your mat gets used so much it does not heal it will leave a negligible groove and when you cut across it it will leave uncut threads.
I have used a Martelli cutter for the last 8 years and wouldn't trade it for anything else. When I put a new blade in I can cut 20 layers easily. I have to step down to about 12-14 layers when the blade gets used a lot.
These cutters are true ergonomic cutters and for anyone with arthritis, carpel tunnel, or hand fatigue they can't be beat. They even take the strain off a bad shoulder because you don't have to put your elbow out to the side and cut at 45 degrees.
You cut with the normal swing of your arm at 90 degrees straight out from your body. Since you have better control of the cutter straight out, there is less chance of veering off the side when cutting. The 45 degree cutters cost about $25.00 which is less than the new quick change Olfa cutters which run $30.00. I a real fan. I have both the 45mm and the 60mm cutters.
OzarksGma
04-13-2011, 01:57 PM
#98
Junior Member
Join Date: Jun 2010
Location: Missouri
Posts: 155
I have tried all the cutters - Fiskars, Olfa, etc. - and believe it or not I prefer the Dritz. It seems to fit in my hand the best.
I also tried one of those yellow orbital sharpeners and found it quite lacking. I did hear that there are folks you can mail your used blades to that will sharpen them and mail them back. Anyone got an address or website?[/quote]
I sharpen the rotary cutters, both 45 and 60mm. I own a shop and sharpen the rotary blades and scissors. You can mail them in and I will sharpen and mail them back to you.
OzarksGma
I also tried one of those yellow orbital sharpeners and found it quite lacking. I did hear that there are folks you can mail your used blades to that will sharpen them and mail them back. Anyone got an address or website?[/quote]
I sharpen the rotary cutters, both 45 and 60mm. I own a shop and sharpen the rotary blades and scissors. You can mail them in and I will sharpen and mail them back to you.
OzarksGma
04-13-2011, 02:02 PM
#100
Junior Member
Join Date: Jun 2010
Location: Missouri
Posts: 155
I see in the paper that JoAnns has all rotary cutters and supplies at 50% off[/quote]
The only problem with JoAnns, they don't carry the Martelli. Top quality and they are worth every penny even paying full price. If you've ever used one, there is no going back to the old cutters no matter what brand you used.
OzarksGma
The only problem with JoAnns, they don't carry the Martelli. Top quality and they are worth every penny even paying full price. If you've ever used one, there is no going back to the old cutters no matter what brand you used.
OzarksGma
Thread
Thread Starter
Forum
Replies
Last Post
