Respond if you have a Singer 15-91
01-21-2016, 08:51 PM
#41
Member
Thread Starter
Join Date: Jan 2016
Location: Montana, USA
Posts: 84
I have the large Singer zigzagger attachment in question, the black with cams that look like red knobs (I think there is a yellow cam set, as well as a blue). I can confirm it will work on any low shank machine like the 15. It's probably not the best zigzagger made, but it has the highest number of stitch patterns. For me it hasn't been practical at all. It does zigzag, but nothing like the swing needle zigzag on my vintage Bernina or Elna Supermatic. It's hard to maneuver, particularly along edges, and it misbehaves on thinner fabrics; there is nothing like the sating stitch fine tuning you get on the 1950s Berninas and Elnas on this attachment. I rather go for the narrow Greist version, or Japanese made versions. The Swiss zigzagger cost a bit too much, but isn't impossibly expensive if you really want it.
http://www.ebay.com/itm/Made-In-USA-...EAAOSwX~dWlBML
01-21-2016, 09:06 PM
#42
Member
Thread Starter
Join Date: Jan 2016
Location: Montana, USA
Posts: 84
I have a 15-91. It was my grandmothers, then my mothers...they have both passed away now but I remember my mom using it to sew my sister and I dresses when we were girls. I am not sure why, but she always gave the hand wheel a turn before she started sewing...like you do when using a treadle. Now that I know how to use a treadle it makes me laugh to think about her doing that (the 15-91 is electric remember). Anyway, DH rewired mine (by Rain's instructions) and while the machine worked OK, it was not great. Just before Christmas I came here trying to figure out what was wrong, and by reading my manual I realized I had been putting the needle in wrong!!! For 2 years!!! Anyway, it sews great now and I use it for everything. I have not tried FMQing yet though. I have the zig zagger too, which works well and is fun to watch but have only played w/it so far. I was not happy w/this machine until recently but I am glad I did not give up on it.
01-22-2016, 08:55 PM
#43
Member
Join Date: Jun 2015
Location: Jeffersonville IN
Posts: 72
I have 1 15. I purchased it to do quilting and FMQ. I also have an original grace frame that I had my 1970's Kenmore on. But it just isn't very fond of FMQ on the frame. So I have taken it off. I am up for suggestions for what to put on the frame that would have a larger throat space and would be good with FMQ. Should I just get another 15-91?
01-23-2016, 04:10 PM
#46
Junior Member
Join Date: Dec 2011
Location: Oregon High Desert
Posts: 137
I recently got one in the cabinet with three boxes of attachments and a buttonholer to boot for $20! The cabinet was well taken care of and the machine has all the decals in super nice condition. Needed cleaning, grease and oil. She received that and runs smooth as a top. Sits on display in my living room at all times. Need to do a project on it soon.
01-23-2016, 07:17 PM
#47
Senior Member
Join Date: Jan 2014
Posts: 773
Aww, that's sweet their machine is still in use. When she gave the hand wheel a turn was she inserting the needle in the fabric before sewing? Maybe she got her intructions from page 7 of this book under the heading of "How to Start and End a Seam." http://ismacs.net/singer_sewing_mach...rence-book.pdf
And, thanks for that link, I downloaded the book to look at later, they are often funny but you can learn something!
01-24-2016, 11:05 AM
#49
Junior Member
Join Date: Feb 2015
Location: Larimore ND
Posts: 256
I have a darling Singer 15-91 from 1954. It's the potted motor model and came in a simple little flip-top cabinet. I wish it was an heirloom from a family member or friend, but I adopted it at an ARC thrift store. The machine, cabinet, foot pedal, bobbins and a couple feet for $50 at a local thrift shop. The machine is in wonderful condition. The walnut cabinet has light scuffs and nicks, mostly on the legs.
It runs, but I've finally located an OSMG that is going to replace the frayed electric wires and give it a good check up. It runs, but the wires smell hot.
It runs, but I've finally located an OSMG that is going to replace the frayed electric wires and give it a good check up. It runs, but the wires smell hot.
Last edited by Caroline94535; 01-24-2016 at 11:17 AM.
01-24-2016, 11:24 AM
#50
Senior Member
Join Date: Feb 2012
Posts: 673
15-30 early
15-88 treadle
15-89 hand crank
15-90 external motor (with belt)
Thread
Thread Starter
Forum
Replies
Last Post
