Go Back  Quiltingboard Forums >
  • Main
  • Expert seam rippers >
  • Expert seam rippers

  • Expert seam rippers

    Thread Tools
     
    Old 03-05-2011, 01:00 PM
      #51  
    Junior Member
     
    Derla's Avatar
     
    Join Date: Jun 2010
    Location: Rochester, Minnesota
    Posts: 152
    Default

    I haven't read the whole forum on this subject so maybe i"m just repeating what has already been suggested. After all these years I've found something I like better than a seam ripper. On the package it is called a Snap Off Blade Cutter -- I'd always used them for trimming wall paper. But now always have one hand to rip seams open. If the blade gets dull, just break off the last segment of the blade and you have a new, sharp blade to work with - and you can retract the blade when not using it.

    Derla
    Derla is offline  
    Old 03-05-2011, 01:12 PM
      #52  
    Super Member
     
    Grace MooreLinker's Avatar
     
    Join Date: Dec 2010
    Location: Oregon
    Posts: 1,904
    Default

    Originally Posted by mtspools
    Originally Posted by Beebee
    Tell me ladies and gents...is there an art to seam ripping. Do I have to take lessons on this subject? I have just ripped right through my finished block. Also do seam ripper dull? Do I have to replace them?
    I have used mine a lot as I am sure others have.
    I don't like seam rippers. They are all to dull for me,but I am in fast motion most the time anyway. :)
    I couldn't sew without one.
    Grace MooreLinker is offline  
    Old 03-05-2011, 01:15 PM
      #53  
    Member
     
    Marty's Avatar
     
    Join Date: Dec 2010
    Location: Mesa, AZ
    Posts: 11
    Default

    They are good but the blade is exposed and so easy to cut the fabric. I think can all agree there really isn't any 100% safe method!
    Marty is offline  
    Old 03-05-2011, 01:21 PM
      #54  
    Super Member
     
    patski's Avatar
     
    Join Date: Sep 2010
    Location: Tucson AZ
    Posts: 2,103
    Default

    Originally Posted by susie-susie-susie
    I use the technique that SherriB uses. cut every 5 or 6 stitches and then pull the bobbin thread. Rips right out. Then I use my sticky lint roller to remove the short threads.
    Sue
    You can use the pet hair sweeper from pledge! It picks up all the short threads and you can use it on your ironing board to get those too
    patski is offline  
    Old 03-05-2011, 01:23 PM
      #55  
    Super Member
     
    ghostrider's Avatar
     
    Join Date: Jan 2009
    Posts: 4,688
    Default

    Originally Posted by Marty
    And equally as dangerous. Sounds like an accident looking for a place to happen. :*)
    The amount of "danger" all depends on what you're used to and the care you take in using the tools at hand. Sewing, in all it's many forms, is chock full of sharp instruments; it's only logical to use them for 'alternative' purposes. Ripping seams with a blade of any kind makes perfect sense and when I don't care about stretching the fabric, I simply use one blade of my 5" scissors.
    ghostrider is offline  
    Old 03-05-2011, 01:26 PM
      #56  
    Member
     
    Marty's Avatar
     
    Join Date: Dec 2010
    Location: Mesa, AZ
    Posts: 11
    Default

    I have some 5" Ginger's and you are right, if they have just been sharpened they will do a good job especially taking out a hem. Sharp is sharp, there is danger everywhere!! lol
    Marty is offline  
    Old 03-05-2011, 01:37 PM
      #57  
    Super Member
     
    Join Date: Apr 2010
    Location: Fort White, Fl
    Posts: 2,689
    Default

    Seam ripping is like driving, the more you drive the better you get so the more you rip the better you get. Believe me I can rip a seam.
    lillybeck is offline  
    Old 03-05-2011, 01:46 PM
      #58  
    Senior Member
     
    Join Date: Jan 2010
    Location: georgia
    Posts: 533
    Default

    I usually break mine.
    dorrell ann is offline  
    Old 03-05-2011, 01:52 PM
      #59  
    Member
     
    Marty's Avatar
     
    Join Date: Dec 2010
    Location: Mesa, AZ
    Posts: 11
    Default

    You should open a "Ripping Service"!!! :*)
    Marty is offline  
    Old 03-05-2011, 02:07 PM
      #60  
    Super Member
     
    Join Date: Dec 2010
    Location: Dallas area, Texas, USA
    Posts: 3,042
    Default

    My mom used to use a single edged razor blade, pulling the fabric taught to expose the stitches as much as possible and just tapping them. She could do that very fast. It would not be a good idea to try it on small stitches or on any quilting stitches where you can't pull the layers apart. My mom was not a quilter, but an excellent dressmaker. You don't want to do it that way if there is anyone around who might startle you. I cut myself just a little one time and went back to old fashioned seam rippers. In one of Eleanor Burns' videos someone is shown cutting stitches with a rotary cutter. I don't remember if it was EB herself or a student in one of her classes. Seeing that gave me the heebyjeebies! Even if you manage not to amputate a finger, the odds seem rather high that you could destroy your fabric.
    Rose_P is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    BrendaK
    Main
    70
    01-25-2011 08:00 PM
    pllboyer
    Main
    11
    12-16-2010 08:17 PM
    Up North
    Main
    37
    04-02-2010 07:01 AM
    treeboss
    Links and Resources
    1
    02-01-2010 10:50 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter