Go Back  Quiltingboard Forums > Main
Ok please post your opinions! Change in plans? >

Ok please post your opinions! Change in plans?

Ok please post your opinions! Change in plans?

Thread Tools
 
Old 09-19-2013, 09:55 AM
  #11  
Member
Thread Starter
 
rmb282's Avatar
 
Join Date: Jan 2011
Location: Central PA
Posts: 39
Default

Hey ladies, thanks for your help. I actually spoke with the other store location and felt much more comfortable with that salesman. He didn't seem near as pushy and said both machines offer different advantages so he thought I should definitely compare the two. He is actually the manager of the first store but is working at the second due to people being on vacation so it is all working itself out. That store has both machines there to compare side by side.
rmb282 is offline  
Old 09-19-2013, 10:04 AM
  #12  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

I have to agree that the Melody seems to have a much smaller throat. The dealer may not understand the specialized requirements of quilters -- especially for the large throat. Many also like the accufeed feature for piecing.
Prism99 is offline  
Old 09-19-2013, 10:22 AM
  #13  
Super Member
 
Join Date: Jan 2012
Location: The Colony, TX
Posts: 3,364
Default

I don't know anything about either machine but if one has the accufeed as EasyPeezy says - I would definitely not buy until I had tried that. I have that on my pfaff and LOVE it
quiltstringz is offline  
Old 09-19-2013, 10:34 AM
  #14  
Super Member
 
Join Date: Jan 2012
Posts: 4,783
Default

I don't know what the features are for the Baby Lock Melody, but I have a Baby Lock Symphony which I love. It has dual feed dogs (upper and lower), "needle down", and a vertical bobbin just like my older beloved Pfaff machines had. It also has some features which my older Pfaff doesn't have, which I really love and use: knee lift for the presser foot, thread cutter, huge clear plastic table to fit around the machine. The mark on the throat plate for a quarter inch seam is accurate. As already advised, learn the features of both machines from the internet and read reviews on each before you go. Know exactly what features are most important to you and list them on paper, then test drive both machines. Both brands of machine are good, so I don't think you can go wrong here. The only drawback I remember to the Janome 6600 is that part of the bed doesn't pull off to sew around a narrow opening, like the cuff of a long sleeved shirt or infant's clothes (no free arm). That may or not matter to you.
JustAbitCrazy is offline  
Old 09-19-2013, 10:49 AM
  #15  
Senior Member
 
Join Date: Aug 2010
Location: NW Indiana
Posts: 384
Default

Sounds like he's trying to sell you what he has in stock. Maybe it IS the better machine of the 2, but you will only know for sure until you try both. And even if he does sell more of the Babylocks to quilters, that doesn't mean it's the right machine for YOU. Don't let someone talk you into anything. Just my 2 cents worth.
sarge1 is offline  
Old 09-19-2013, 11:42 AM
  #16  
Super Member
 
Join Date: Mar 2011
Location: Central NJ
Posts: 5,571
Default

Originally Posted by sarge1 View Post
Sounds like he's trying to sell you what he has in stock. Maybe it IS the better machine of the 2, but you will only know for sure until you try both. And even if he does sell more of the Babylocks to quilters, that doesn't mean it's the right machine for YOU. Don't let someone talk you into anything. Just my 2 cents worth.
I'm with sarge1 on this one. If you can make it to the other location, particularly since you seem to have a better rapport with that person, I would do that.

I know nothing about either machine so can't help you there. I will tell you that the dealer I normally go to has for the most part switched brands over the last couple of years. They still have a few Vikings but not many. They are really pushing the brand (and don't remember which) they are now carrying...so much better, etc. Same story as you were getting from the first store. I did a lot of online searching for features, etc. before I bought. Determined which were must-haves and nice-to-haves and let that be the determining factor for my purchase (viking). And, of course, $$ played a part. I couldn't be happier with my Viking. At 10-12 years old she still just purrs along with no servicing in that time. The repair guy at the local dealer I purchased from can fix just about anything so that was also a factor for me. But I knew that before even looking there at machines.
NJ Quilter is offline  
Old 09-19-2013, 11:55 AM
  #17  
Super Member
 
gale's Avatar
 
Join Date: Apr 2007
Location: North-Central Indiana
Posts: 4,909
Default

I had an older babylock and hated it. I ended up giving to my mother in law for simple patching jobs. To be honest, I felt bad for giving her a crap machine. I bought it at a dealer but they closed shortly after I bought it so I had no help from them. I also bought a babylock serger at the time and it's now an expensive door stop. Maybe they've improved since then-I can't imagine that I got two lemons.

I have 3 Janome machines, including the 6600P, and love them all.
gale is offline  
Old 09-19-2013, 12:21 PM
  #18  
Super Member
 
Join Date: Jan 2012
Posts: 4,783
Default

Originally Posted by JustAbitCrazy View Post
I don't know what the features are for the Baby Lock Melody, but I have a Baby Lock Serenade which I love. It has dual feed dogs (upper and lower), "needle down", and a vertical bobbin just like my older beloved Pfaff machines had. It also has some features which my older Pfaff doesn't have, which I really love and use: knee lift for the presser foot, thread cutter, huge clear plastic table to fit around the machine. The mark on the throat plate for a quarter inch seam is accurate. As already advised, learn the features of both machines from the internet and read reviews on each before you go. Know exactly what features are most important to you and list them on paper, then test drive both machines. Both brands of machine are good, so I don't think you can go wrong here. The only drawback I remember to the Janome 6600 is that part of the bed doesn't pull off to sew around a narrow opening, like the cuff of a long sleeved shirt or infant's clothes (no free arm). That may or not matter to you.
Correction: My machine is a Serenade, not Symphony. Sorry 'bout that.
JustAbitCrazy is offline  
Old 09-19-2013, 12:30 PM
  #19  
Super Member
 
DogHouseMom's Avatar
 
Join Date: Jan 2011
Location: Knot Merrill, Southern Indiana
Posts: 5,781
Default

I suspect he's really talking up the Baby Lock because that's what he has in stock

Make your own decision. Test drive it, and if you like it and it has the features you like, get it. If not, hold out for what you want.

I don't think the Baby lock has a built in dual-feed system though and it's one of the things I love about my Janome 6600.

Good luck!
DogHouseMom is offline  
Old 09-19-2013, 12:35 PM
  #20  
Power Poster
 
Join Date: May 2008
Location: MN
Posts: 24,433
Default

From what you've said - I would be very wary about that first sales person.
bearisgray is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NJ Quilter
Main
12
11-04-2018 02:15 AM
117becca
Pictures
34
12-24-2010 07:03 AM
diogirl
Main
10
09-06-2010 03:05 PM
QuiltingGrannie
General Chit-Chat (non-quilting talk)
10
02-04-2010 03:10 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter