Go Back  Quiltingboard Forums >
  • Machine Embroidery
  • Electric stitch ripper for embroidery- worth it? >
  • Electric stitch ripper for embroidery- worth it?

  • Electric stitch ripper for embroidery- worth it?

    Thread Tools
     
    Old 06-07-2022, 06:31 PM
      #1  
    Member
    Thread Starter
     
    Join Date: Dec 2017
    Location: Fort Erie, Ontario
    Posts: 5
    Default Electric stitch ripper for embroidery- worth it?

    I just saw an ad for an electric seam ripper that shaves off the underside of your embroidery, and lifts stitches on the right side off- this is the claim. Has anyone used one of these to correct mistakes? Does it work well? It looks like a beard trimmer….
    Bettyvoice is offline  
    Old 06-08-2022, 04:23 AM
      #2  
    Junior Member
     
    Join Date: Oct 2016
    Posts: 164
    Default

    I think I should try a beard trimmer! That may work just as well...I purchased one from Nancy's Notions quite some years ago. Sounded like a great thing to have. I used it to remove applique stitching, but the stitching was so tight it wouldn't work until I took a seam ripper to it, very carefully cut through the threads and then used the seam ripper. Gave it to my daughter. Then I had seen The Quick Ripper (The ultimate seam ripper) ad from www.jmichellewatts.com. so I ordered one and had the same results. But for embroidery work if the stitching isn't as tight as it is on applique, it might work.
    "cat"astrophy is offline  
    Old 06-08-2022, 01:55 PM
      #3  
    Super Member
     
    Join Date: May 2017
    Location: Sunny Florida
    Posts: 4,424
    Default

    I just pop the bobbin threads on the under-side with a seam ripper. Pull out stitches with a pair of tweezers on the front.
    Rhonda K is offline  
    Old 06-09-2022, 03:31 AM
      #4  
    Super Member
     
    Join Date: Nov 2010
    Posts: 1,538
    Default

    Not worth the money, I had one, more trouble than it's worth, didn't do a good job and I still had to pick out stitches. I was also afraid I'd shave off too much and cut the fabric.
    rjwilder is offline  
    Old 06-09-2022, 06:39 AM
      #5  
    Super Member
     
    Macybaby's Avatar
     
    Join Date: Jul 2013
    Location: South Dakota
    Posts: 8,145
    Default

    I have found that any savings in the ripping is used up in plucking all the tiny cut off threads out.

    I do have an electric seam ripper - that works just like a mini beard trimmer. Don't know if what you are referring to is like that, but it didn't work near like I was hoping and I haven't used it in a couple of years now. So far I've never had a significant amount of embroidery stitching I needed to remove. My machine has so many sensors it has always stopped before I've got a big mess.
    Macybaby is offline  
    Old 06-09-2022, 04:13 PM
      #6  
    Senior Member
     
    imdelagarza62's Avatar
     
    Join Date: Nov 2011
    Location: Leander, Tx
    Posts: 530
    Default

    I have 2 Peggy's stitch erasers, one my son gifted for Mothers day a few years ago and one I purchased from ebay. I use them quite often and actually have used to unrip large seams as well, ie taking apart shirts etc to reuse fabric. There is another less expensive one than the Peggy's stitch eraser, but a battery operated beard trimmer works too.
    imdelagarza62 is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter