So Frustrated!!
09-26-2012, 09:03 AM
#43
Senior Member
Join Date: Mar 2010
Location: El Paso Texas
Posts: 987
I have had many Pfaffs...in fact I think I should hold stock. Now, my 1473 from the dark ages, but which I still love....when you put the thread in the bobbin, it should go counter clockwise. On my newest Pfaff, the Creative Sensation...it is the opposite. I had the same problem you describe when I tried to load the 1473 with the bobbin going clockwise. I sure hope this helps, having a new machine is such a thrill and having problems with that same machine is just the PITTS.
09-26-2012, 09:27 AM
#44
Super Member
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
What kind of store did you buy it from? WalMart(or similar) or an actual sewing machine shop? If from a sewing machine shop, you should have gotten some lessons on "learning" about your machine and learning what the machine can do. I would take it to them and tell them you need some lessons on the machine. If from a non sewing machine shop, I would probably take it back and get my money back, then I would go to a sewing machine shop and see what they had, but they should offer you classes on your machine.
09-26-2012, 01:29 PM
#45
Super Member
Join Date: Mar 2008
Location: AZ and CT
Posts: 4,898
Are you threading with the needle up? Also try grabbing both bobbin and top threads when starting a seam.
Regardless of design - I've had the top thread pop out of the take up lever. In machine embroidery, the problem is often the opposite side. If you have a rat's nest underneath, the problem is usually on the top somewhere.
With the bobbin - check to make sure it's securely in there. The new Ambition is drop-in bobbin isn't it? Those who use drop-in bobbins might have more suggestions.
I've got vertical bobbins and they don't always catch on the spindle and pop out. There used to be a good click on the older Pfaffs, not so now.
The older Pfaffs had lousy thread cutters. A lot of times they will NOT pick up the bobbin thread correctly or at all. However, with a drop-in bobbin the thread cutter should have improved.
Regardless of design - I've had the top thread pop out of the take up lever. In machine embroidery, the problem is often the opposite side. If you have a rat's nest underneath, the problem is usually on the top somewhere.
With the bobbin - check to make sure it's securely in there. The new Ambition is drop-in bobbin isn't it? Those who use drop-in bobbins might have more suggestions.
I've got vertical bobbins and they don't always catch on the spindle and pop out. There used to be a good click on the older Pfaffs, not so now.
The older Pfaffs had lousy thread cutters. A lot of times they will NOT pick up the bobbin thread correctly or at all. However, with a drop-in bobbin the thread cutter should have improved.
09-26-2012, 03:25 PM
#46
Super Member
Join Date: Apr 2010
Location: Snellville, Ga & Hiawassee
Posts: 1,994
when I got a new fancy machine I had that happen and it wound up that the bobbins for my new machine were just enough different from my other machine (same brand) and it only wanted to have its special toys to play with-lol.
09-26-2012, 05:58 PM
#47
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Arkansas
Posts: 112
I got it fixed, I think...It was a needle issue. First I thought it was in all the way since it was tight, but it wasnt. Then, the material I was usinng to test was too thick (thus the skipping issues). I changed the needle to a jeans needle and what do ya know, problem solved!! Thanks for all your help!!
09-27-2012, 07:15 AM
#50
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Arkansas
Posts: 112
No, the dealer only offered class on how to use it after I called saying I couldn't get it to work. I got it right at closing time & I think they were ready to go home. :/ I got it working i think, but I think I'll still go down to make sure everything is ok on it.
Thread
Thread Starter
Forum
Replies
Last Post
Snorky Lvs2Quilt
Main
16
04-21-2011 09:57 PM
Flying_V_Goddess
Main
22
03-19-2008 03:25 PM
