Worst trouble with this block
08-26-2010, 08:01 AM
#1
Senior Member
Thread Starter
Join Date: Jul 2009
Location: Illinois
Posts: 768
Have you ever had a pattern for a block that didn't work right. I had to recut and resew this block pattern 3 times. Luckily I decided to try just one block before I committed to a whole quilt. Love the outcome, but my brain is tired. My sew friend and I both had trouble so I know it just wasn't me.
08-26-2010, 08:05 AM
#2
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,476
Were the original pattern pieces correct?
The "squares" around the center square appear somewhat rectangular in the picture. Are they supposed to be that way?
Sometimes I will do a paper cutout/mockup with the pieces to see if they are right and fit together the way I expected them to.
I had bought some plastic templates (printed on sheets and then one cuts out the ones one wants for a particular block) and the "basic unit" was not square. It was 1/8 inch bigger in one direction. Not a huge amount, but 1/8 inch is quite a bit to ease in on a four inch length. After fighting with the whole quilt, I FINALLY measured the template. YUP. It was off.
That was a few years ago. Now I have a little more trust in myself - and less "complete faith" in patterns and instructions.
The "squares" around the center square appear somewhat rectangular in the picture. Are they supposed to be that way?
Sometimes I will do a paper cutout/mockup with the pieces to see if they are right and fit together the way I expected them to.
I had bought some plastic templates (printed on sheets and then one cuts out the ones one wants for a particular block) and the "basic unit" was not square. It was 1/8 inch bigger in one direction. Not a huge amount, but 1/8 inch is quite a bit to ease in on a four inch length. After fighting with the whole quilt, I FINALLY measured the template. YUP. It was off.
That was a few years ago. Now I have a little more trust in myself - and less "complete faith" in patterns and instructions.
08-26-2010, 08:12 AM
#7
Super Member
Join Date: Jan 2007
Location: Crystal River Florida
Posts: 9,785
Where did the pattern come from? I have heard others mention getting a pattern that wasn't right.(Maybe the instructions were wrong.)
I am guessing your problem was with the diamonds since the outside points are cut off. It looks like the piece that is sewn to the diamond isn't long enough.....just guessing without having the pattern to actually look at!
I hope you can get it figured out, as it is a neat block! :D :D
I am guessing your problem was with the diamonds since the outside points are cut off. It looks like the piece that is sewn to the diamond isn't long enough.....just guessing without having the pattern to actually look at!
I hope you can get it figured out, as it is a neat block! :D :D
Thread
Thread Starter
Forum
Replies
Last Post
knlsmith
General Chit-Chat (non-quilting talk)
58
02-06-2010 08:48 AM
