Go Back  Quiltingboard Forums >
  • Tutorials
  • How to Make an Easy Patchwork Jacket >
  • How to Make an Easy Patchwork Jacket

  • How to Make an Easy Patchwork Jacket

    Thread Tools
     
    Old 06-15-2010, 04:05 AM
      #81  
    Junior Member
     
    mimistutz's Avatar
     
    Join Date: May 2010
    Location: DE
    Posts: 192
    Default

    DYER804
    I also liked the curved bottom, but even more the curved neckline. Seems like it shouldn't me too hard to cut it that way. Getting both sides the exact same might be the hardest part. The tip of doing it after the pieces are attached sounds like a good one to help keep from stretching it any.
    Amazing how they are all different, but all beautiful!!!
    mimistutz is offline  
    Old 06-15-2010, 06:25 AM
      #82  
    Junior Member
     
    Join Date: May 2010
    Location: upstate New York
    Posts: 227
    Default

    After you cut the fabrics into different widths don't you have to cut those strips into different length before you cut your shapes? What lengths
    blackbearbetty is offline  
    Old 06-15-2010, 08:36 AM
      #83  
    Senior Member
     
    quilting memaw's Avatar
     
    Join Date: Mar 2009
    Location: Spokane, Washington
    Posts: 365
    Default

    Has any one tried a fractured bargelo jacket? Now that's a challenge...Mine is half done and it has been that way for over a year! LOL....need to get on that again.
    quilting memaw is offline  
    Old 06-15-2010, 06:45 PM
      #84  
    Super Member
    Thread Starter
     
    UglyCook's Avatar
     
    Join Date: Apr 2010
    Location: Auburn, WA
    Posts: 1,343
    Default

    Originally Posted by blackbearbetty
    After you cut the fabrics into different widths don't you have to cut those strips into different length before you cut your shapes? What lengths
    I cut a bunch of rectangles, triangles, squares and "other" shapes. Mostly around 2-5".
    UglyCook is offline  
    Old 06-15-2010, 06:53 PM
      #85  
    Super Member
    Thread Starter
     
    UglyCook's Avatar
     
    Join Date: Apr 2010
    Location: Auburn, WA
    Posts: 1,343
    Default

    Ok, I finally have all of the pieces on.

    At this point you need to decide how you will finish your edges. You can use packaged binding, make your own binding, or use ribbon, a zipper, or ???

    I am going to use a piece of the leftover fabric to make my binding. I will cut 2" strips and press 1/4" in from each side. Four strips, the width of the fabric, should be more than enough. I like to have plenty.

    After trimming the wild threads, I sewed the ribbing on the collar down. I simply folded it towards the front, bending it at the seam, and straight stitched it. Since I will have binding running up the front edge, I just needed to get close to the front opening with the collar.

    After straight stitching it, I decided I wanted the collar to have the same zig zag stitch I will be finishing the binding with so I added that.

    Turning the ribbing on the collar down
    [ATTACH=CONFIG]86521[/ATTACH]

    Decorative stitching I added
    [ATTACH=CONFIG]86522[/ATTACH]
    Attached Thumbnails attachment-86516.jpe   attachment-86517.jpe  
    UglyCook is offline  
    Old 06-15-2010, 07:19 PM
      #86  
    Super Member
    Thread Starter
     
    UglyCook's Avatar
     
    Join Date: Apr 2010
    Location: Auburn, WA
    Posts: 1,343
    Default

    Now, if you are putting your sleeve binding on and then sewing the sleeve seam, do it now.

    I am going to put a "seamless" binding on mine, like on a quilt so I am going to go ahead and stitch my sleeves and sides shut.
    Start at the sleeve and just stitch all the way up to the arm pit and down to the bottom edge.

    I LOVE my serger for this!

    One thing to keep in mind: this does make a slightly narrow sleeve. If you have large arms, you should measure before you stitch it up. You might want to make your 3/4 sleeves.

    I pin the cuff, the arm pit, and the bottom to make sure they come out even
    [ATTACH=CONFIG]86542[/ATTACH]
    Attached Thumbnails attachment-86537.jpe  
    UglyCook is offline  
    Old 06-16-2010, 03:46 AM
      #87  
    Senior Member
     
    Join Date: Sep 2007
    Posts: 327
    Default

    Thank you so much (I hate to call you ugly cook) for your tutorial . . . you make it sound easy!
    Nell is offline  
    Old 06-16-2010, 08:58 AM
      #88  
    Super Member
    Thread Starter
     
    UglyCook's Avatar
     
    Join Date: Apr 2010
    Location: Auburn, WA
    Posts: 1,343
    Default

    Oops, you only press one side of the binding in 1/4 inch.
    UglyCook is offline  
    Old 06-16-2010, 02:42 PM
      #89  
    Senior Member
     
    Fabriholic's Avatar
     
    Join Date: Feb 2009
    Location: IL
    Posts: 452
    Default

    I was going to ask you to post a pic of the inside and viola - there it is! Thanks so much for this wonderful tutorial. Di
    Fabriholic is offline  
    Old 06-16-2010, 09:06 PM
      #90  
    Super Member
    Thread Starter
     
    UglyCook's Avatar
     
    Join Date: Apr 2010
    Location: Auburn, WA
    Posts: 1,343
    Default

    Here are the pics of how I did my cuffs

    Three width-of-fabric strips sewn together, 1/4 inch pressed over
    [ATTACH=CONFIG]87142[/ATTACH]

    Pin the binding around the sleeve and mark with a pin where the ends will be sewn
    [ATTACH=CONFIG]87189[/ATTACH]

    Sew the binding and you end up with a circle like this
    [ATTACH=CONFIG]87190[/ATTACH]

    Slip the cuff onto the sleeve, right side of cuff facing the wrong side of the sleeve. Raw edges together, creased edge away from the opening
    [ATTACH=CONFIG]87191[/ATTACH]

    I sewed inside the circle, rather than trying to slide the sleeve onto my machine. After stitching the raw edges together, I flipped the pressed edge to the patchwork side and zig zagged it down to match my patchwork pieces
    [ATTACH=CONFIG]87192[/ATTACH]

    Here's how it looks when finished
    [ATTACH=CONFIG]87193[/ATTACH]
    Attached Thumbnails attachment-87137.jpe   attachment-87184.jpe   attachment-87185.jpe   attachment-87186.jpe   attachment-87187.jpe  

    attachment-87188.jpe  
    UglyCook is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    UglyCook
    Tutorials
    100
    07-29-2023 04:10 PM
    UglyCook
    Pictures
    83
    08-07-2010 04:17 PM
    sondray
    Links and Resources
    0
    04-17-2009 05:59 AM
    sondray
    Links and Resources
    0
    03-26-2009 03:38 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter