Anyone Ever hear of a Phoenix Sewing Machine?
#24
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I also posted pics on the vintage sewing machine shop - seems like they came up there just fine.
Last edited by miriam; 10-31-2012 at 03:47 PM.
#25
Member
Thread Starter
Join Date: Apr 2012
Posts: 30
Yes, I have the manual and the cams that go with. I haven't yet tried it out as there is a wire that needs to be taped. It came in a cabnet with a knee controller. Two plug in wires. One for the knee controller, I assume, and the other for the light. Once I get that bare wire taped, I will try her out. She is also a green machine.
The reason it took so long for me to answer this thread, my computer was so clogged with junk, I had to do some fixing on it.
Claudia
The reason it took so long for me to answer this thread, my computer was so clogged with junk, I had to do some fixing on it.
Claudia
#26
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I got my Phoenix to sew. You have to put the bobbin thread through a little loop - I missed that the first 65 times I tried - I finally said Uncle and looked it up on line and got that fixed. I'm wondering what needle it takes. Mine has a needle image on the slide plate - much smaller than the needle in the machine. It says 1738 so I wonder what that means. If it is smaller, why does the needle in the machine work? I haven't tested the decorative stitches yet - I still need to get power to the machine. It's table is at the shop and the machine is at home... I think I might fall in love with this one.
#27
Super Member
Join Date: Dec 2011
Location: Northern CA near Sacramento
Posts: 1,107
Miriam,
Here are some of the pictures you sent to me of the Phoenix.
I hope that they show up.
Cathy
[ATTACH=CONFIG]374228[/ATTACH][ATTACH=CONFIG]374229[/ATTACH][ATTACH=CONFIG]374230[/ATTACH][ATTACH=CONFIG]374231[/ATTACH][ATTACH=CONFIG]374232[/ATTACH][ATTACH=CONFIG]374233[/ATTACH]
Here are some of the pictures you sent to me of the Phoenix.
I hope that they show up.
Cathy
[ATTACH=CONFIG]374228[/ATTACH][ATTACH=CONFIG]374229[/ATTACH][ATTACH=CONFIG]374230[/ATTACH][ATTACH=CONFIG]374231[/ATTACH][ATTACH=CONFIG]374232[/ATTACH][ATTACH=CONFIG]374233[/ATTACH]
#28
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Wow Cathy - you did the impossible!!!
Top picture - a little lever releases the bobbin hatch
The bobbin in it's case lifts out and in - the bobbin threads like a normal bobbin then there is a hole in one of the little fork like things for thread to go through
In the back of the machine is a cam stack - the lever on the top releases it
it came out very easily - I think there should be a way to take them on and off - mine is on very tight right now
Then I reinstalled the cam stack. The cam stack controls are on the front of the machine next to the stitch length regulator. The machine takes industrial type round shank needles but regular needles will go in - very hard to get out though. If you get the industrial type needles you have to make the needle hole line up just so. Not hard to do once you have done it.
Top picture - a little lever releases the bobbin hatch
The bobbin in it's case lifts out and in - the bobbin threads like a normal bobbin then there is a hole in one of the little fork like things for thread to go through
In the back of the machine is a cam stack - the lever on the top releases it
it came out very easily - I think there should be a way to take them on and off - mine is on very tight right now
Then I reinstalled the cam stack. The cam stack controls are on the front of the machine next to the stitch length regulator. The machine takes industrial type round shank needles but regular needles will go in - very hard to get out though. If you get the industrial type needles you have to make the needle hole line up just so. Not hard to do once you have done it.
Thread
Thread Starter
Forum
Replies
Last Post
pinkCastleDH
For Vintage & Antique Machine Enthusiasts
0
09-24-2012 12:21 PM