Electrify a tredle?
08-04-2014, 07:47 PM
#1
Member
Thread Starter
Join Date: Jan 2014
Location: Tennessee
Posts: 17
Electrify a tredle?
I have my grandmothers old singer 66. It is a great machine and still works. I remember sitting on my grandmothers lap and watching her sew. I am interested in doing fmq. Would it be a sin to add a motor make it electric? I don't think I am coordinated enough to move my hand and my feet at the same time.
Thanks,
Sherri
Thanks,
Sherri
08-05-2014, 08:38 AM
#4
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
We really tend to go in the other direction here, returning "electrified" machines to treadle.
I would suggest you give it a fair try before you convert it. Literally millions of people have done it, you can too!!
With my "rant" over here it the general sequence:
First, determine if machine has motor/handcrank boss on the right side under the big wheel. (most made after WWI do have this). It is a rectangular raised area with a threaded hole in it.
If YES, then all you have to do is buy a motor, mounting bracket, and cord set with foot pedal.
If no, then you have a LOT more work involved, drilling and such.
I would suggest you give it a fair try before you convert it. Literally millions of people have done it, you can too!!
With my "rant" over here it the general sequence:
First, determine if machine has motor/handcrank boss on the right side under the big wheel. (most made after WWI do have this). It is a rectangular raised area with a threaded hole in it.
If YES, then all you have to do is buy a motor, mounting bracket, and cord set with foot pedal.
If no, then you have a LOT more work involved, drilling and such.
08-05-2014, 08:47 AM
#5
Super Member
Join Date: Aug 2013
Location: Springfield Oregon
Posts: 1,481
you may have to be tried for QB Hi Crimes and Misdemeanors, if you go thru with it! LOL. Or at least excommunication. check out the FB page on vintage sewing machine embroidery to see treadles bding used to do amazing free motion work. it takes a while, but its eminenently do-able.
Last edited by oldsewnsew; 08-05-2014 at 08:57 AM.
08-05-2014, 11:06 AM
#7
Super Member
Join Date: Feb 2012
Posts: 8,091
Sherri,
Model 66s do not drop the feed dogs, so you'll have to find either a cover plate, old OEM or new style or try it with the stitch length set at 0. I think they call them darning plates. They look like this:
[ATTACH=CONFIG]486470[/ATTACH]
What SteveH said about converting them. I have unconverted one Singer 66 treadle and would do it to any of them.
There are MANY electric Singer 66s in cabinets to use without (in my opinion) ruining a treadle machine.
I can treadle and up until 2 years ago I'd never sat in front of a treadle machine before. If klutzy old J Miller can run a treadle machine, you can.
Joe
Model 66s do not drop the feed dogs, so you'll have to find either a cover plate, old OEM or new style or try it with the stitch length set at 0. I think they call them darning plates. They look like this:
[ATTACH=CONFIG]486470[/ATTACH]
What SteveH said about converting them. I have unconverted one Singer 66 treadle and would do it to any of them.
There are MANY electric Singer 66s in cabinets to use without (in my opinion) ruining a treadle machine.
I can treadle and up until 2 years ago I'd never sat in front of a treadle machine before. If klutzy old J Miller can run a treadle machine, you can.
Joe
08-05-2014, 11:08 PM
#9
Super Member
Join Date: Mar 2013
Location: Brisbane, Australia
Posts: 1,850
Originally Posted by pennycandy
Are the presser feet the back clamp type? If so, do you have a back clamp type darning foot?
08-06-2014, 04:41 AM
#10
Super Member
Join Date: Mar 2012
Location: Thornton, Colorado
Posts: 1,023
My grandmother had a treadle sewing machine and she later had it electrified. It worked well for her. I am sorry to say I don't remember the brand, model or how it was done. She passed away in 1975 and I was not into quilting as I am now.
Thread
Thread Starter
Forum
Replies
Last Post
