New owner of Pfaff 130, handwheel spins freely on shaft
#1
Member
Thread Starter
Join Date: Jun 2018
Posts: 2
New owner of Pfaff 130, handwheel spins freely on shaft
Hello,
I'm hoping someone here might be able to help me...I recently acquired a Pfaff 130, and am having trouble with the plastic (bakelite?) handwheel just spinning on the shaft instead of operating the machine. ( I'm pretty new to sewing machines but am somewhat mechanically inclined.)
I've taken the wheel and clutch piece off and reinstalled it both ways, but that made no difference. There apparently is isn't anything actually securing the handwheel to the shaft, but it looks like maybe there should be...there is a hole in the handwheel that I see lines up with another hole in the shaft. Am I missing a part that should be in there?
Thanks much in advance for any help. I've googled for an exploded parts diagram, but haven't found one.
I'm hoping someone here might be able to help me...I recently acquired a Pfaff 130, and am having trouble with the plastic (bakelite?) handwheel just spinning on the shaft instead of operating the machine. ( I'm pretty new to sewing machines but am somewhat mechanically inclined.)
I've taken the wheel and clutch piece off and reinstalled it both ways, but that made no difference. There apparently is isn't anything actually securing the handwheel to the shaft, but it looks like maybe there should be...there is a hole in the handwheel that I see lines up with another hole in the shaft. Am I missing a part that should be in there?
Thanks much in advance for any help. I've googled for an exploded parts diagram, but haven't found one.
#5
Member
Thread Starter
Join Date: Jun 2018
Posts: 2
Thanks for the replies! I have those parts, and the lobed 'washer' is what I meant when I said clutch piece in my first post. I tried installing that both ways, but it didn't make any difference. Here are some photos...on more thought is that maybe there should be something in the wide shallow groove in the shaft that secures the handwheel? Otherwise, it seems to be just a plastic handwheel sitting on a steel shaft with nothing connecting them together? The holes in the handwheel and steel shaft, and wide shallow groove, can be seen in these photos:
#6
I don't have a 130 but I am betting there should be a set screw through that hand wheel and resting in the divot in the shaft. Prolly metric. You could take the handwheel to a hardware store to try and find a match. You may get a better answer. or someone with first hand knowledge my confirm this. or Hey maybe a parts diagram?
Thread
Thread Starter
Forum
Replies
Last Post
Daffy Daphne
Pictures
57
11-03-2019 03:33 PM
Beautiful_Sound
For Vintage & Antique Machine Enthusiasts
8
12-01-2015 09:32 AM
Smorris17119
For Vintage & Antique Machine Enthusiasts
11
04-02-2014 11:28 AM
Yarn or Fabric
Pictures
14
11-02-2012 04:52 AM