Vintage Sewing Machine Shop.....Come on in and sit a spell
#3321
I have one just like this...Isn't this a wonderful machine...Mine has the motor, but also had the belt with it...and it has extra feet...
Diane in Louisiana
Diane in Louisiana
#3322
Originally Posted by jackkip
I was using the goop with no pumice. I guess I was just too worried about getting the gunk off. It really does look better. Just now most everything is silver insted of gold. Oh well, it will look good as a decoration. Just wanted to share so someone else doesn't make the same mistake
#3323
Originally Posted by Crossstitcher
Want to thank everyone for the help reguarding the white treadle machine. But, what I am having trouble with is a Hilton sewing machine. I posted pictures a few pages back. This machine has really been a bummer but I'll get it. Hubby said we will get it or make a boat anchor out of it and we don't own a boat. (he thought that was funny!!) Again thanks for all the help past,present,and future.
A couple of weeks ago, an OSMG with 50 years experience and I spent 2 1/2 hours trying to figure out what was wrong with my 201. Even though we had checked the bobbin and found no rough spot, we finally figured out that the loop was catching on the lower side of the bobbin and throwing the stitch off. I learned that my 201 doesn't like the new bobbins and only wants to sew with the originals!!
#3324
Banned
Thread Starter
Join Date: Oct 2009
Location: Bikini Bottom
Posts: 5,652
Originally Posted by jackkip
I was using the goop with no pumice. I guess I was just too worried about getting the gunk off. It really does look better. Just now most everything is silver insted of gold. Oh well, it will look good as a decoration. Just wanted to share so someone else doesn't make the same mistake
It sounds like the shellac that protected the machine was crazed and really deteriorated to the point it came off with the Go Jo. I have seen places on the beds that will do that sometimes but you have to be careful but you need to get it off. Its a double edged sword. Also the gold is sometimes the Shellac that the put on the machine.
But I will say it looks a lot better and very shiny!!
Billy
#3325
Originally Posted by Miz Johnny
Originally Posted by Crossstitcher
Want to thank everyone for the help reguarding the white treadle machine. But, what I am having trouble with is a Hilton sewing machine. I posted pictures a few pages back. This machine has really been a bummer but I'll get it. Hubby said we will get it or make a boat anchor out of it and we don't own a boat. (he thought that was funny!!) Again thanks for all the help past,present,and future.
A couple of weeks ago, an OSMG with 50 years experience and I spent 2 1/2 hours trying to figure out what was wrong with my 201. Even though we had checked the bobbin and found no rough spot, we finally figured out that the loop was catching on the lower side of the bobbin and throwing the stitch off. I learned that my 201 doesn't like the new bobbins and only wants to sew with the originals!!
:?
#3326
This is the cutest machine sears offered. They offered this one and a fullsized one just like this one. Even the controller the case the accessory box everything was pink!!!
I almost had one but I was out bid on eBey for over $200 for the full sized one with all of the accessories.
Nice machine and hang on to it because it will be the more expensive of all the Kenmores built!!!
Billy
You are soooooo knowledgable! You are like a walking sewing machine encyclopedia!
#3327
Where is a good place to buy a quality belt for my treadle machine? Also where can I get a 1/4 inch foot, bobbins and a free motion foot for it. Right now DH has it converted to a low shank. Thanks!!!!!
#3328
Thanks, I will keep trying.
Undo the hook on the belt and cut a little off and take a nail or something like that make another hole for the hook and put it back together.
You will have to do this a few time through the course of the belt stretching but it will eventually stop.
Billy
Originally Posted by Lostn51
Originally Posted by GrammaNan
OK, I finally clicked on this thread after how many months? The lap top I am using sits on top of a treadle sewing machine. I have unhooked the belt and I "treadle" while I type. I have changed the belt and have had my dad adjust it so many times that I am embarrassed to ask him again and it is still too loose. I cannot use it for sewing and it is so frustrating. I love this machine. Any suggestions?
You will have to do this a few time through the course of the belt stretching but it will eventually stop.
Billy
#3329
After cleaning the iron treadle works on this last Singer Red Eye I got my DH discovered the singer mfg part on each end is either bronzed or painted gold color. I have two other old works like that and they are not gold color. Is this an oddity or something done on just certain ones. It sure looks nice. Thanks in advance.
#3330
After cleaning the iron treadle works on this last Singer Red Eye I got my DH discovered the singer mfg part on each end is either bronzed or painted gold color. I have two other old works like that and they are not gold color. Is this an oddity or something done on just certain ones. It sure looks nice. Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM