Vintage Sewing Machine Shop.....Come on in and sit a spell
Member
Join Date: Aug 2015
Location: New Hampshire
Posts: 2
This being page 2 of 4465 is kind of mind blowing. How do I know where I am, and where I want to go? I've been replacing the line wire of an old ACE motor from a dressmaker using new cloth covered wire. I've been taking pictures as I go and a video as well. Are all 4465 pages the same "thread"? Lastly, I hope you don't mind but you can enjoy the stool, I'll pull up a recliner.
dressmaker site:.quiltingboard.com
Adding the bit on the right means Google will only search this site, and any link will get you straight to the right page.
Senior Member
Join Date: Jul 2015
Posts: 594
I am cleaning up and oiling a Brother 1361A ; threaded her up and tried to sew, only to find that the feed dogs don't advance the fabric. They seem to be moving, but too far below the plate to catch the fabric. Can anyone point me towards finding a solution?
Senior Member
Join Date: Jul 2015
Posts: 594
Ha! I just found out the problem--the stitch selector was set on "darn." I switched it to "norm" and the feed dogs came up appreciably. Probably will advance now. Gonna go play with it some more.
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
I think we all do something like that at one point. My last one was looking for how to take the top off a different Brother machine. I finally realized it was a one piece casting. The top doesn't come off.
Rodney
Rodney
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
They don't want just anybody oiling and cleaning their sewing machine...
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
It was a two tone paint job. my eyes aren't what they used to be. Now if I could only figure out how to get the knobs and plate off the pillar. The blind hem stitch isn't working quite right. If I hold the stitch selector knob to one side it works but if I let go, it doesn't. Zigzag and straight stitch are just fine. Brother put the cams in the pillar on this one and it isn't obvious on how to take it apart.
Rodney
Rodney
Senior Member
Join Date: Feb 2012
Posts: 673
Rodney, have you tried heat? I find sometimes it's required to loosen up the old built-up oil. Putting the machine in a black plastic bag this time of year (you're not in Alaska, are you? Washington - same thing.) or, more conventionally, using a blow-dryer to warm the mechanism will free up the swing on a zigzag needle.
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
It was a two tone paint job. my eyes aren't what they used to be. Now if I could only figure out how to get the knobs and plate off the pillar. The blind hem stitch isn't working quite right. If I hold the stitch selector knob to one side it works but if I let go, it doesn't. Zigzag and straight stitch are just fine. Brother put the cams in the pillar on this one and it isn't obvious on how to take it apart.
Rodney
Rodney
Rodney, a word of advice-don't take off the front parts. Been there, done that and it's not a pretty sight trying to put it back together. I almost pitched the machine out the window. If you can hold on, I'll come down tomorrow and help you, show you what I mean.
Cari
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM