Vintage Sewing Machine Shop.....Come on in and sit a spell
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Have any of you tried using metallic thread on your 401a's or a similar machine? Yesterday, I changed needles (to a metallic needle), re-threaded several times, put the metallic thread on a spool behind the machine so the thread could relax before it hit the thread guides, played with the tension, did everything I could think of to get my new 401a to accept the metallic thread! No go - I spent an hour going 5 inches, cutting the bobbin thread off every 1/2" or so when it jammed, removing the slide plate, cleaning the bobbin area, re-threading the bobbin - everything I could think of! I would sew a 1/2 inch or so then it jammed up - had to cut the bobbin thread off underneath due to a huge mess. I switched to a 50 weight DMC thread and didn't have any issues at all? I really wanted to use metallic thread on a little Patchability I was doing!
Nancy
Nancy
Senior Member
Join Date: Jan 2011
Location: Northern California
Posts: 559
Nancy, try using a top stitch needle and see if that helps. Kathie
Yep, makes sense to me too. Luckily, I have not had to tweak any of my treadles! My Betty (Davis Vertical Feed) is by far the hardest/most work out to treadle. I think that is probably because I only use her to put bindings on Queen/King sized quilts, and because she has to 'walk' the quilt to sew!
Nancy
Nancy
My Davis NVF treadles with ease. The machine is louder than some of my others, but the treadle is smooth and easy to treadle.
Geeze, Charlee that is an interesting article. Reminds me of what Glenn says about the fact that the wood is dead and doesn't need feeding or something like that. Glenn, I'd like to see your observations on that article. Does that mean I have to quit using Liquid Gold on my cabinets - I love the way they shine when I use it?
Nancy
Nancy
Have any of you tried using metallic thread on your 401a's or a similar machine? Yesterday, I changed needles (to a metallic needle), re-threaded several times, put the metallic thread on a spool behind the machine so the thread could relax before it hit the thread guides, played with the tension, did everything I could think of to get my new 401a to accept the metallic thread! No go - I spent an hour going 5 inches, cutting the bobbin thread off every 1/2" or so when it jammed, removing the slide plate, cleaning the bobbin area, re-threading the bobbin - everything I could think of! I would sew a 1/2 inch or so then it jammed up - had to cut the bobbin thread off underneath due to a huge mess. I switched to a 50 weight DMC thread and didn't have any issues at all? I really wanted to use metallic thread on a little Patchability I was doing!
Nancy
Nancy
http://freemotionquilting.blogspot.c...t-needles.html
Regarding using something else for belts. I'm like faaaarrrrrrr away from anyone that sells belts. I ordered two leather ones and could not for the life of me get one stapled together. In trying to make a hole - the belt kept slipping and hole went in crooked and resulted in the belt splitting. Soooo I read here on the board that someone used the leg of a panty hose and I tried it. Works like a charm and cost was zero. And was much easier to put on - just stretch it as far as it would go and tie a knot.
Also I have a question. Can someone tell me the model number of a Singer electric machine - serial #AH300426. I think it was manufactured in 1947. It belongs to a friend and she needs a power cord that goes from machine to plug in. I've never seen the machine - just going by her description.
Also I have a question. Can someone tell me the model number of a Singer electric machine - serial #AH300426. I think it was manufactured in 1947. It belongs to a friend and she needs a power cord that goes from machine to plug in. I've never seen the machine - just going by her description.
Regarding using something else for belts. I'm like faaaarrrrrrr away from anyone that sells belts. I ordered two leather ones and could not for the life of me get one stapled together. In trying to make a hole - the belt kept slipping and hole went in crooked and resulted in the belt splitting. Soooo I read here on the board that someone used the leg of a panty hose and I tried it. Works like a charm and cost was zero. And was much easier to put on - just stretch it as far as it would go and tie a knot.
Also I have a question. Can someone tell me the model number of a Singer electric machine - serial #AH300426. I think it was manufactured in 1947. It belongs to a friend and she needs a power cord that goes from machine to plug in. I've never seen the machine - just going by her description.
Also I have a question. Can someone tell me the model number of a Singer electric machine - serial #AH300426. I think it was manufactured in 1947. It belongs to a friend and she needs a power cord that goes from machine to plug in. I've never seen the machine - just going by her description.
Your friend's machine is a 66, commissioned on Oct. 27, 1947. contact mizkaki, I'm betting she's got a cord at the best price.
Thanks Charlee for your quick response. Where did you go to find the model number? I went to singer and found out it was mfg. in 1947 but not model number. When I went on line to order the cord I was asked for model number.
Ismacs.net has links to the old Singer files for serial numbers.
http://www.ismacs.net/singer_sewing_...-database.html
http://www.ismacs.net/singer_sewing_...-database.html
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM