Need some help!!
#12
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Originally Posted by MadQuilter
Just for grins: What happens to stitch length when you change it on regular pieces of fabric? Does it change?
What batting are you using? Does the sandwich travel easy through the machine, or do you have to pull and tug?
What batting are you using? Does the sandwich travel easy through the machine, or do you have to pull and tug?
#13
Super Member
Join Date: Mar 2009
Location: western Pa
Posts: 4,569
Are you supporting the weight of the quilt? Is the quilt bunching up so it's not moving freely under the needle? My quilting area is very small and if the quilt bunches up against the back wall it doesn't move freely and my stitches are very small. (hope that made sense) I also use my ironing board to help support the weight of the quilt on the side by me so there's no extra tension or pull on the quilt. This also affects the size of my stitches.
#14
Take that piece out and try a regular piece of fabric to see if it is the machine or the bulk of the fabric causing the tiny stitches. If it is the machine it is possible that the bobbin is hanging up somhow. I have to ask, did you put the foot down while changing the tension? If you didn't, it didn't change a thing. It has to be down to change it.
Also, check the way the thread is being held all along the line of the machine. Sometimes it accidently gets stuck somewhere, or the tension disks need cleaning with apiece of dental floss. All else failing the machine is just not happy with the density of the quilt. Oh one more thing... open up the machine and clean out any threads hanging around that don't belong there.
Also, check the way the thread is being held all along the line of the machine. Sometimes it accidently gets stuck somewhere, or the tension disks need cleaning with apiece of dental floss. All else failing the machine is just not happy with the density of the quilt. Oh one more thing... open up the machine and clean out any threads hanging around that don't belong there.
#16
Originally Posted by JudyG
I was having a problem yesterday with little tiny stitches. I was so frustrated. I turned my machine off and when I came back and tried it again, it worked fine. Why? Who knows.
#18
Oh, and something I'm always doing--Once I've positioned the quilt sandwich to begin sewing, it's often so thick that I forget to lower the presser foot bar. You'd know if you were doing that pretty quick though...the bottom thread is all loopy and the machine complains.
#19
Originally Posted by MadQuilter
Just for grins: What happens to stitch length when you change it on regular pieces of fabric? Does it change?
What batting are you using? Does the sandwich travel easy through the machine, or do you have to pull and tug?
What batting are you using? Does the sandwich travel easy through the machine, or do you have to pull and tug?
Thanks for your help>>>always enjoy your comments on the blog!!
#20
Originally Posted by janRN
Are you supporting the weight of the quilt? Is the quilt bunching up so it's not moving freely under the needle? My quilting area is very small and if the quilt bunches up against the back wall it doesn't move freely and my stitches are very small. (hope that made sense) I also use my ironing board to help support the weight of the quilt on the side by me so there's no extra tension or pull on the quilt. This also affects the size of my stitches.
Thread
Thread Starter
Forum
Replies
Last Post
Jmncolts
Main
41
03-14-2012 05:25 AM
Flying_V_Goddess
Main
11
11-24-2007 04:37 PM