tube quilting
#22
All these suggestions are good. I didn't use starch, but did use a square. Aligned opposite points on the seam and cut. I did put "The Steady Betty" (little adhesive anti-slip pieces) to the back of all my rulers. Also put a new blade in the rotary cutter. I didn't have any problems. I've attached a picture so you can see. I had a half of a Bali pop, so I added strips of white. This is just a large lap quilt. Still need to add boarders.
Summer in the Park
[ATTACH=CONFIG]242613[/ATTACH]
#23
Senior Member
Join Date: Apr 2010
Location: Sunny Arizona
Posts: 476
Originally Posted by ssnare
I have watched this on u tube. I cut fabric using a regular ruler with a 45 degree angle. My problem is that every triangle I cut comes out to be a different size. What am I doing wrong? Or can someone help me? Thank you.
#24
This is a pretty quilt. Thank you all for your help. It is the Missouri sewing that I have watched on u tube. What do you mean when you say, "Aligned opposite points on the seam and cut."? I use a square ruler too. And the only angle that is marked on the ruler is a 45 degree angle.
Originally Posted by dallen4350
All these suggestions are good. I didn't use starch, but did use a square. Aligned opposite points on the seam and cut. I did put "The Steady Betty" (little adhesive anti-slip pieces) to the back of all my rulers. Also put a new blade in the rotary cutter. I didn't have any problems. I've attached a picture so you can see. I had a half of a Bali pop, so I added strips of white. This is just a large lap quilt. Still need to add boarders.
#25
What ruler do I need to buy?
I guess I chickened out and bought the ruler. Makes it easy. Ann
Originally Posted by krafty14
Originally Posted by ssnare
I have watched this on u tube. I cut fabric using a regular ruler with a 45 degree angle. My problem is that every triangle I cut comes out to be a different size. What am I doing wrong? Or can someone help me? Thank you.
#27
Senior Member
Join Date: Jun 2011
Posts: 976
When making this be sure to go heavy on the starch, the thing about the tube is that it creates bias edges on the outside. Be careful not to stretch...handle the fabric like a newborn baby.
I didn't buy any special rulers, I used my degrees mark on my long ruler, using painters tape to mark where you need is helpful.
I didn't buy any special rulers, I used my degrees mark on my long ruler, using painters tape to mark where you need is helpful.
#28
Originally Posted by ssnare
This is a pretty quilt. Thank you all for your help. It is the Missouri sewing that I have watched on u tube. What do you mean when you say, "Aligned opposite points on the seam and cut."? I use a square ruler too. And the only angle that is marked on the ruler is a 45 degree angle.
Originally Posted by dallen4350
All these suggestions are good. I didn't use starch, but did use a square. Aligned opposite points on the seam and cut. I did put "The Steady Betty" (little adhesive anti-slip pieces) to the back of all my rulers. Also put a new blade in the rotary cutter. I didn't have any problems. I've attached a picture so you can see. I had a half of a Bali pop, so I added strips of white. This is just a large lap quilt. Still need to add boarders.
Also, after the 1st cut, make sure that the cut edge of the quarter inch seam allowance runs along the edge of the square. That sounds confusing, but basically be sure that the point of the square or the edge of the ruler is aligned to the cut edge of the seam. If it is off even a little, then your pieces would come out different sizes. I have attached pictures.
Hope this helps.
Imagine the strip continuing, The two points of the ruler would be on the seam.
[ATTACH=CONFIG]242622[/ATTACH]
Shows how the edge of the ruler aligns with the previous cut.
[ATTACH=CONFIG]242623[/ATTACH]
Thread
Thread Starter
Forum
Replies
Last Post
n2scraplvr
General Chit-Chat (non-quilting talk)
17
11-09-2009 09:14 PM