My Daughters' Heritage: Their Great-Grandmother's 1917? Western Electric Sew-EZ Sewing Machine
08-29-2011, 09:13 AM
#13
Senior Member
Join Date: Dec 2009
Location: Oklahoma
Posts: 776
Originally Posted by BuzzinBumble
My husband's dear aunt had this little beauty tucked away and recently asked if anyone in the family was interested. My hubby and his sisters all said "No thank you." :shock:
I told DH to correct that impression before his aunt gave it away to the local historical society. Our two girls were very interested indeed! They both value ties to the past and our eldest, Bean, did not have a sewing machine. Turned out Bean was VERY excited about this.
So yesterday my two sweet SILs brought the Sew-EZ to our house. Even though the machine is in great condition, I hardly know what to do next. My one SIL was a home-ec teacher and she tested the machine and it works! She sewed two inches before stopping since the machine surely needs cleaning and oiling. The electrical cord is amazing for one that is close to 100 years old, but I cannot think it is safe.
Our Bean and her boyfriend are coming home for a visit this weekend. I don't know if I can get the machine shaped up in time, but it sure would be good for her to be able to take it home while they have a rental car. (Normally she flies, but her arms were too tired. :roll: )
There is hardly any information about this machine out on the internet. So I am sending out an SOS to all you vintage machine enthusiasts and am hoping you can point me in the right direction. Ours has no manual, or accessories, except 2 bobbins. And I am very leery about the power cord, but don't know how to replace it. We don't know for sure even what model this is, but it has two spool posts and only does a straight stitch. Meanwhile, I have been pouring over Billy's tutorial about how to take apart and clean your vintage machine. Not sure I have have the guts to do the "Taking apart" part of that!
Here is what little I found on the internet:
The Western Electric sewing machine was not made by Western Electric, but by the National Sewing Machine Company, Belvedere, Ill., which put Western Electric decals on one of their models.
The electric motor, however, was produced by Western Electric. Production lasted only a few years; the machine disappeared from the market by 1918.
I also found a number of amusing vintage advertisements about this machine.
Ours does not have a vibrating shuttle, but a bobbin case and bobbins. It came in a beautiful, curved quarter sawn oak case.
Here are a lot of pictures. Thanks for looking!
I told DH to correct that impression before his aunt gave it away to the local historical society. Our two girls were very interested indeed! They both value ties to the past and our eldest, Bean, did not have a sewing machine. Turned out Bean was VERY excited about this.
So yesterday my two sweet SILs brought the Sew-EZ to our house. Even though the machine is in great condition, I hardly know what to do next. My one SIL was a home-ec teacher and she tested the machine and it works! She sewed two inches before stopping since the machine surely needs cleaning and oiling. The electrical cord is amazing for one that is close to 100 years old, but I cannot think it is safe.
Our Bean and her boyfriend are coming home for a visit this weekend. I don't know if I can get the machine shaped up in time, but it sure would be good for her to be able to take it home while they have a rental car. (Normally she flies, but her arms were too tired. :roll: )
There is hardly any information about this machine out on the internet. So I am sending out an SOS to all you vintage machine enthusiasts and am hoping you can point me in the right direction. Ours has no manual, or accessories, except 2 bobbins. And I am very leery about the power cord, but don't know how to replace it. We don't know for sure even what model this is, but it has two spool posts and only does a straight stitch. Meanwhile, I have been pouring over Billy's tutorial about how to take apart and clean your vintage machine. Not sure I have have the guts to do the "Taking apart" part of that!
Here is what little I found on the internet:
The Western Electric sewing machine was not made by Western Electric, but by the National Sewing Machine Company, Belvedere, Ill., which put Western Electric decals on one of their models.
The electric motor, however, was produced by Western Electric. Production lasted only a few years; the machine disappeared from the market by 1918.
I also found a number of amusing vintage advertisements about this machine.
Ours does not have a vibrating shuttle, but a bobbin case and bobbins. It came in a beautiful, curved quarter sawn oak case.
Here are a lot of pictures. Thanks for looking!
08-29-2011, 09:49 AM
#15
Super Member
Join Date: Apr 2007
Location: North Carolina - But otherwise, NOTW
Posts: 7,940
Hi Lara - I have one of these gorgeous machines, too, and I also am leery of the electricals. We haven't tried replacing the wiring yet, but will be doing that this Fall.
You are right about the National Sewing Machine Company manufacturing this machine for Western Electric. Actually they only did it for 2 years, and then Western Elect decided not to sell them. You can find information on needles, bobbins and maybe a manual at the ISMACS website.
You are right about the National Sewing Machine Company manufacturing this machine for Western Electric. Actually they only did it for 2 years, and then Western Elect decided not to sell them. You can find information on needles, bobbins and maybe a manual at the ISMACS website.
08-29-2011, 10:00 AM
#16
Senior Member
Join Date: Feb 2009
Location: Southeast Michigan
Posts: 825
Originally Posted by BuzzinBumble
My husband's dear aunt had this little beauty tucked away and recently asked if anyone in the family was interested. My hubby and his sisters all said "No thank you." :shock:
I told DH to correct that impression before his aunt gave it away to the local historical society. Our two girls were very interested indeed! They both value ties to the past and our eldest, Bean, did not have a sewing machine. Turned out Bean was VERY excited about this.
So yesterday my two sweet SILs brought the Sew-EZ to our house. Even though the machine is in great condition, I hardly know what to do next. My one SIL was a home-ec teacher and she tested the machine and it works! She sewed two inches before stopping since the machine surely needs cleaning and oiling. The electrical cord is amazing for one that is close to 100 years old, but I cannot think it is safe.
Our Bean and her boyfriend are coming home for a visit this weekend. I don't know if I can get the machine shaped up in time, but it sure would be good for her to be able to take it home while they have a rental car. (Normally she flies, but her arms were too tired. :roll: )
There is hardly any information about this machine out on the internet. So I am sending out an SOS to all you vintage machine enthusiasts and am hoping you can point me in the right direction. Ours has no manual, or accessories, except 2 bobbins. And I am very leery about the power cord, but don't know how to replace it. We don't know for sure even what model this is, but it has two spool posts and only does a straight stitch. Meanwhile, I have been pouring over Billy's tutorial about how to take apart and clean your vintage machine. Not sure I have have the guts to do the "Taking apart" part of that!
Here is what little I found on the internet:
The Western Electric sewing machine was not made by Western Electric, but by the National Sewing Machine Company, Belvedere, Ill., which put Western Electric decals on one of their models.
The electric motor, however, was produced by Western Electric. Production lasted only a few years; the machine disappeared from the market by 1918.
I also found a number of amusing vintage advertisements about this machine.
Ours does not have a vibrating shuttle, but a bobbin case and bobbins. It came in a beautiful, curved quarter sawn oak case.
Here are a lot of pictures. Thanks for looking!
I told DH to correct that impression before his aunt gave it away to the local historical society. Our two girls were very interested indeed! They both value ties to the past and our eldest, Bean, did not have a sewing machine. Turned out Bean was VERY excited about this.
So yesterday my two sweet SILs brought the Sew-EZ to our house. Even though the machine is in great condition, I hardly know what to do next. My one SIL was a home-ec teacher and she tested the machine and it works! She sewed two inches before stopping since the machine surely needs cleaning and oiling. The electrical cord is amazing for one that is close to 100 years old, but I cannot think it is safe.
Our Bean and her boyfriend are coming home for a visit this weekend. I don't know if I can get the machine shaped up in time, but it sure would be good for her to be able to take it home while they have a rental car. (Normally she flies, but her arms were too tired. :roll: )
There is hardly any information about this machine out on the internet. So I am sending out an SOS to all you vintage machine enthusiasts and am hoping you can point me in the right direction. Ours has no manual, or accessories, except 2 bobbins. And I am very leery about the power cord, but don't know how to replace it. We don't know for sure even what model this is, but it has two spool posts and only does a straight stitch. Meanwhile, I have been pouring over Billy's tutorial about how to take apart and clean your vintage machine. Not sure I have have the guts to do the "Taking apart" part of that!
Here is what little I found on the internet:
The Western Electric sewing machine was not made by Western Electric, but by the National Sewing Machine Company, Belvedere, Ill., which put Western Electric decals on one of their models.
The electric motor, however, was produced by Western Electric. Production lasted only a few years; the machine disappeared from the market by 1918.
I also found a number of amusing vintage advertisements about this machine.
Ours does not have a vibrating shuttle, but a bobbin case and bobbins. It came in a beautiful, curved quarter sawn oak case.
Here are a lot of pictures. Thanks for looking!
08-29-2011, 11:06 AM
#18
Super Member
Join Date: Apr 2007
Location: Southern California
Posts: 2,746
WOWZERs, that machine is beautiful! Great save. It doesn't even look like it would need much cleaning but may need to check to see if there is dried oil on the parts just behind the faceplate.
Maybe that you are lucky and just needs a good oiling and working it in to all the nooks and crannies.
Any local electrical shop should be able to check the wires. It doesn't look like the machine was used much so the wires may have not gotten warm from use and therefore are not brittle. But if your daughter is going to use it I would change them. It is not that hard you can do it!
Maybe that you are lucky and just needs a good oiling and working it in to all the nooks and crannies.
Any local electrical shop should be able to check the wires. It doesn't look like the machine was used much so the wires may have not gotten warm from use and therefore are not brittle. But if your daughter is going to use it I would change them. It is not that hard you can do it!
08-29-2011, 01:56 PM
#19
Super Member
Thread Starter
Join Date: Jun 2011
Location: near Niagara Falls, NY
Posts: 3,075
Originally Posted by GGinMcKinney
Beautiful machine! How fortunate to keep it loved in the family. Is there a photo of great grandma sewing on it? Would be wonderful to at least have a photo of her to pass along with her machine.
08-29-2011, 02:01 PM
#20
Super Member
Thread Starter
Join Date: Jun 2011
Location: near Niagara Falls, NY
Posts: 3,075
Originally Posted by jljack
Hi Lara - I have one of these gorgeous machines, too, and I also am leery of the electricals. We haven't tried replacing the wiring yet, but will be doing that this Fall.
You are right about the National Sewing Machine Company manufacturing this machine for Western Electric. Actually they only did it for 2 years, and then Western Elect decided not to sell them. You can find information on needles, bobbins and maybe a manual at the ISMACS website.
You are right about the National Sewing Machine Company manufacturing this machine for Western Electric. Actually they only did it for 2 years, and then Western Elect decided not to sell them. You can find information on needles, bobbins and maybe a manual at the ISMACS website.
Thread
Thread Starter
Forum
Replies
Last Post
lakekids
For Vintage & Antique Machine Enthusiasts
4
07-03-2012 03:16 PM
ppquilter
For Vintage & Antique Machine Enthusiasts
5
05-17-2012 01:15 PM
Butterfli19
General Chit-Chat (non-quilting talk)
30
11-24-2009 09:59 PM
