Originally Posted by dirty1mom
The two machines I just brought home are rough. The Spartan is missing it's thread plate and the wiring is scary looking. I can't find a serial number on it. The Singer in the cabinet has a serial number underneath the machine bed, G049713. I think I am either looking it up wrong on singer site or that is not really the serial number. Where else should I look?
|
Originally Posted by Kathie S.
I need some help big time. My tension is really bad. The top thread bird nested under neath. I took the machine in to the shop and they adjusted the tension and had a very nice stitch. I came home and the stitch turned bad. The fabric is gathering. When I straighten it out the bobbin thread is laying on the fabric and the top thread is showing a small loop. Any suggestions would be helpful. Kathie
Most beautiful stitch ever after I put the bobbin in right :mrgreen: |
Originally Posted by jpete523
My Spartan 192K is in a black plastic base. When you unscrew the base you'll find the serial number on the bottom of the machine. Good luck!
|
Originally Posted by BoJangles
Originally Posted by dirty1mom
The two machines I just brought home are rough. The Spartan is missing it's thread plate and the wiring is scary looking. I can't find a serial number on it. The Singer in the cabinet has a serial number underneath the machine bed, G049713. I think I am either looking it up wrong on singer site or that is not really the serial number. Where else should I look?
Nancy That is what I found but wasn't sure I looked at the site right. Didn't seem to have enough numbers. Thank you. |
Looked at the site again. I think maybe it is a 27 from 1910?
|
Originally Posted by sewbizgirl
I love all the new machines you all are adopting, and Billy-- so sorry about the storm damage. We had bad tornadoes here too, but thankfully, no damage at our place.
I have been making ruffles on my Lotus tonight, and am just amazed at the mechanical wonder that the ruffler is. I feel blessed to have a back-clamping one that came with my machine. In about 30 minutes I had a whole pile of beautiful ruffles that would have taken me hours to make by my old method of pulling up a running stitch and adjusting gathers. Can't believe how much better the OLD technology is, so USE YOUR WEIRD ATTACHMENTS, everybody! They are fun! |
Originally Posted by chris_quilts
Post is not about machines but vintage quilt tops. I was surprised today poking about in a "vintage resale " shop. Came across some unfinshed quilt tops. One of them was old, ragged, stained and tattered but also $150 more than the other top there which was in much better shape. However, the old, tatterd top had been hand pieced and the other one was machine pieced which apparently made all the difference in the prices. While both were beautiful, the one with fewer condition issues is the one I'd have bought if I had been buying one. I assume this would also have applied to any tops machine pieced on a vintage treadle, too.
|
Originally Posted by HanNatNana
Originally Posted by sewbizgirl
I have been making ruffles on my Lotus tonight, and am just amazed at the mechanical wonder that the ruffler is. I feel blessed to have a back-clamping one that came with my machine. In about 30 minutes I had a whole pile of beautiful ruffles that would have taken me hours to make by my old method of pulling up a running stitch and adjusting gathers. Can't believe how much better the OLD technology is, so USE YOUR WEIRD ATTACHMENTS, everybody! They are fun!
Many years ago I used to sew for an interior decorator and must have made kilometres of ruffles!! She had a thing for them and therefore attracted customers with similar ideas, but of course she never had to make them...I did!! Funny part was she didn't know about a ruffler foot and thought I was drawing threads my hand, and years later when she found out she was a little put out that I'd been making them much quicker and therefore getting a little more money than she thought she was paying...which by the way as a pittance anyway. Sometimes when you need extra $$$'s you do these things!! Bronwyn ;-) |
1 Attachment(s)
Well I did something I said I would never ever do. I purchased a machine off ebay. My latest is a Singer 328K, that I want to use in treadle. I like to finish off my bindings with a decorative stitch. I have been using my daughter's Threadbanger T-30 which can handle this type of work so far, but I have been worried about the machine being able to continue to handle this load since the machine has plastic parts. So, I have been on a hunt for a machine to use in treadle that has cams for decorative stitching. I do hope that this machine will work out well for what I wish to use it for.
Last night I cleaned it up and played with all the flat cams and decorative stitches by use of the motor. It worked well after I cleaned up the bobbin area. It had lots of old lint that was well hidden. I also had to vacuum out all the little white foam balls from the packing sheets that were used. Machine arrive undamaged, but the machine's bottom wasn't covered so all the little white foam balls from the packing sheets had traveled up into the inside of the machine. Hank my new Singer 328K [ATTACH=CONFIG]187401[/ATTACH] |
Originally Posted by vintagemotif
I always have fun looking through the bins with all the vintage quilts. I never buy any though, just have fun seeing the fabrics and patterns that were used.
|
All times are GMT -8. The time now is 07:07 PM. |