Embroidery Machines Lets Chat & Have Fun
#2551
Junior Member
Join Date: Apr 2012
Location: Oregon City, OR
Posts: 214
I just started using Floriani thread and love it! I haven't tried the stabilizers since they always seem to be quite expensive, however I just found out a local quilt shop honors the JoAnn coupons so the next 50% off ones I get I may try their stabilizers.
#2552
Junior Member
Join Date: Apr 2012
Location: Oregon City, OR
Posts: 214
I found this on the Craftsy blog.
[h=3]Stabilizer for in-the-hoop embroidery:[/h] You’ll want to be sure to use stabilizer for your embroidery projects. Most projects call for tearaway stabilizer. And this is where I change things up a bit. I like tearaway stabilizer, but sometimes a washaway stabilizer may work better. And other times I prefer to use unbleached muslin that has been pressed and starched as my stabilizer.
My preference for a project that should be soft like a zipper bag or a project that is quilted, is to use a very soft tearaway stabilizer, unbleached muslin, or a paperlike washaway stabilizer. The muslin should be a high quality and have a thread count of 200, rather than a muslin with a looser weave. The stabilizer will end up staying inside the project, so it is important to use something that works with the purpose of the project. Tearaway stabilizers that are left within a project tend to soften with washing and use. If you hold tearaway stabilizer under running water, you will see that it falls apart. This is good for a project that you’d like to be soft.
My preference for a project that stands alone with satin stitches on the outer edge such as Christmas ornaments, coasters, or door hangers, is a washaway stabilizer. Often these projects call for a tearaway, but my experience is that there is always a little bit of the tearaway that can be seen around the edge of the object, even after the project has been wet and dried again. And if you want a very stiff project, after the object is finished, wet it without rinsing all of the washaway stabilizer out and you will see that the stabilizer actually melts and “starches” the ornaments.
[h=3]Stabilizer for in-the-hoop embroidery:[/h] You’ll want to be sure to use stabilizer for your embroidery projects. Most projects call for tearaway stabilizer. And this is where I change things up a bit. I like tearaway stabilizer, but sometimes a washaway stabilizer may work better. And other times I prefer to use unbleached muslin that has been pressed and starched as my stabilizer.
My preference for a project that should be soft like a zipper bag or a project that is quilted, is to use a very soft tearaway stabilizer, unbleached muslin, or a paperlike washaway stabilizer. The muslin should be a high quality and have a thread count of 200, rather than a muslin with a looser weave. The stabilizer will end up staying inside the project, so it is important to use something that works with the purpose of the project. Tearaway stabilizers that are left within a project tend to soften with washing and use. If you hold tearaway stabilizer under running water, you will see that it falls apart. This is good for a project that you’d like to be soft.
My preference for a project that stands alone with satin stitches on the outer edge such as Christmas ornaments, coasters, or door hangers, is a washaway stabilizer. Often these projects call for a tearaway, but my experience is that there is always a little bit of the tearaway that can be seen around the edge of the object, even after the project has been wet and dried again. And if you want a very stiff project, after the object is finished, wet it without rinsing all of the washaway stabilizer out and you will see that the stabilizer actually melts and “starches” the ornaments.
#2553
Banned
Join Date: Mar 2011
Location: Colorado
Posts: 3,536
Thanks for the informative insight.
I am going to put this into my "book of embroidery knowledge".
I am going to put this into my "book of embroidery knowledge".
I found this on the Craftsy blog.
Stabilizer for in-the-hoop embroidery:
You’ll want to be sure to use stabilizer for your embroidery projects. Most projects call for tearaway stabilizer. And this is where I change things up a bit. I like tearaway stabilizer, but sometimes a washaway stabilizer may work better. And other times I prefer to use unbleached muslin that has been pressed and starched as my stabilizer.
My preference for a project that should be soft like a zipper bag or a project that is quilted, is to use a very soft tearaway stabilizer, unbleached muslin, or a paperlike washaway stabilizer. The muslin should be a high quality and have a thread count of 200, rather than a muslin with a looser weave. The stabilizer will end up staying inside the project, so it is important to use something that works with the purpose of the project. Tearaway stabilizers that are left within a project tend to soften with washing and use. If you hold tearaway stabilizer under running water, you will see that it falls apart. This is good for a project that you’d like to be soft.
My preference for a project that stands alone with satin stitches on the outer edge such as Christmas ornaments, coasters, or door hangers, is a washaway stabilizer. Often these projects call for a tearaway, but my experience is that there is always a little bit of the tearaway that can be seen around the edge of the object, even after the project has been wet and dried again. And if you want a very stiff project, after the object is finished, wet it without rinsing all of the washaway stabilizer out and you will see that the stabilizer actually melts and “starches” the ornaments.
Stabilizer for in-the-hoop embroidery:
You’ll want to be sure to use stabilizer for your embroidery projects. Most projects call for tearaway stabilizer. And this is where I change things up a bit. I like tearaway stabilizer, but sometimes a washaway stabilizer may work better. And other times I prefer to use unbleached muslin that has been pressed and starched as my stabilizer.
My preference for a project that should be soft like a zipper bag or a project that is quilted, is to use a very soft tearaway stabilizer, unbleached muslin, or a paperlike washaway stabilizer. The muslin should be a high quality and have a thread count of 200, rather than a muslin with a looser weave. The stabilizer will end up staying inside the project, so it is important to use something that works with the purpose of the project. Tearaway stabilizers that are left within a project tend to soften with washing and use. If you hold tearaway stabilizer under running water, you will see that it falls apart. This is good for a project that you’d like to be soft.
My preference for a project that stands alone with satin stitches on the outer edge such as Christmas ornaments, coasters, or door hangers, is a washaway stabilizer. Often these projects call for a tearaway, but my experience is that there is always a little bit of the tearaway that can be seen around the edge of the object, even after the project has been wet and dried again. And if you want a very stiff project, after the object is finished, wet it without rinsing all of the washaway stabilizer out and you will see that the stabilizer actually melts and “starches” the ornaments.
#2554
I made this for my fiancée for Valentine's Day. It's a saying he always says and I found it at emblibrary.com which suffice to say its my FAVORITE site for design. I used Floriani Thread and not one breakage when stitching out this design. I used cutaway stabilizer and will be finishing it for a pillow for him. Just wanted to share.
#2555
Senior Member
Join Date: Jul 2007
Location: Happily buried in a heap of fabric in Indiana!
Posts: 731
Quiltnut4ever that is very pretty!
#2556
I am so glad I found this post. I have a brother. It only does embroidery and it limited to the 5x7 hoop. Any suggestions as to what I can work on? I do not need to do baby quilts. I do not have grandchildren and will not have any. I use it mainly for quilt labels. I am very new at embroidery and need all the help I can get.
#2557
Junior Member
Join Date: Apr 2012
Location: Oregon City, OR
Posts: 214
I am so glad I found this post. I have a brother. It only does embroidery and it limited to the 5x7 hoop. Any suggestions as to what I can work on? I do not need to do baby quilts. I do not have grandchildren and will not have any. I use it mainly for quilt labels. I am very new at embroidery and need all the help I can get.
#2558
I am so glad I found this post. I have a brother. It only does embroidery and it limited to the 5x7 hoop. Any suggestions as to what I can work on? I do not need to do baby quilts. I do not have grandchildren and will not have any. I use it mainly for quilt labels. I am very new at embroidery and need all the help I can get.
#2559
Junior Member
Join Date: Nov 2011
Location: SW Missouri
Posts: 187
gramquilter2, how on earth do you do embroidery on toilet paper?? Are there any good tutorials out there detailing how it is done? This is something I would really like to try!!
#2560
Here is a tutorial I watched before I did some for Christmas and them I got help from a wonderful person on the board also.
http://www.youtube.com/watch?v=gSBs6CkV1AE
http://www.youtube.com/watch?v=gSBs6CkV1AE
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
General Chit-Chat (non-quilting talk)
22
02-13-2010 12:12 PM