Spiral-Eye Needle Problem
10-03-2017, 04:59 AM
#11
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
Same idea as what you have, except the thread pops in from the top of the needle, rather than on the side as yours does. There is actually a regular hole below that one, that you could thread it in the normal way if you wanted.
I bought mine for burying threads, but have used them for regular hand stitch work.
Will be interested to see what response you get from your email query.
10-03-2017, 05:08 AM
#12
Super Member
Join Date: Jun 2012
Location: Sonoma County, CA
Posts: 4,299
Those are called "self threading needles" - here's a link to some on Amazon; if you mouse over the photo you can get a (slightly blurry) close-up view of what the eyes look like. (No affiliation with this brand, never tried 'em, just picked them for the photo.) https://www.amazon.com/Self-Threadin...eading+needles
That style of needles are made by a lot of companies, including Singer, Dritz & Clover. Joann's carries them too.
I tried them for sewing hexies and didn't like them, personally. The thread popped out a little too often for me, so I went back to standard needles. They're great for burying quilting threads, though, and I didn't have any thread shredding problems.
That style of needles are made by a lot of companies, including Singer, Dritz & Clover. Joann's carries them too.
I tried them for sewing hexies and didn't like them, personally. The thread popped out a little too often for me, so I went back to standard needles. They're great for burying quilting threads, though, and I didn't have any thread shredding problems.
10-03-2017, 05:22 AM
#14
Power Poster
Thread Starter
Join Date: Jul 2017
Location: Central Ohio
Posts: 15,236
Those are called "self threading needles" - here's a link to some on Amazon; if you mouse over the photo you can get a (slightly blurry) close-up view of what the eyes look like. (No affiliation with this brand, never tried 'em, just picked them for the photo.) https://www.amazon.com/Self-Threadin...eading+needles
That style of needles are made by a lot of companies, including Singer, Dritz & Clover. Joann's carries them too.
I tried them for sewing hexies and didn't like them, personally. The thread popped out a little too often for me, so I went back to standard needles. They're great for burying quilting threads, though, and I didn't have any thread shredding problems.
That style of needles are made by a lot of companies, including Singer, Dritz & Clover. Joann's carries them too.
I tried them for sewing hexies and didn't like them, personally. The thread popped out a little too often for me, so I went back to standard needles. They're great for burying quilting threads, though, and I didn't have any thread shredding problems.
10-03-2017, 08:37 AM
#15
Super Member
Join Date: Jan 2011
Location: Nevada
Posts: 6,958
I love self-threading needles. I buy the Fons and Porter ones. The Spiral Eye and Sench needles say they are for mending, sewing buttons, and embroidery (http://www.spiraleyeneedles.com/).
10-03-2017, 07:07 PM
#16
Super Member
Join Date: Mar 2010
Location: Ridgefield WA
Posts: 7,765
Susie, glad you are trying them! When I first saw them they sounded useful for me, too, so I'll be watching this post!
10-03-2017, 07:24 PM
#17
Super Member
Join Date: May 2012
Location: S.E. Queensland, Australia
Posts: 1,487
Perhaps there's a tiny burr in the eye, have you tried a different needle?
I've had a pack of these for a few years, and understood they were created for people whose eyesight makes it difficult to thread a needle, but never heard of the 'spiral' term before.
I've had a pack of these for a few years, and understood they were created for people whose eyesight makes it difficult to thread a needle, but never heard of the 'spiral' term before.
10-03-2017, 07:25 PM
#18
Super Member
Join Date: Mar 2010
Location: Ridgefield WA
Posts: 7,765
Actually, GEMRM, the two (Sench and Spiraleye) are different. If you go to the web site: http://www.spiraleyeneedles.com/Needles.html
about mid-page down you will see an explanation of the difference. My understanding is that the self-threading needles are great for pulling down a loose thread, these others allow sewing along like a regular needle. I'm going to order some!
about mid-page down you will see an explanation of the difference. My understanding is that the self-threading needles are great for pulling down a loose thread, these others allow sewing along like a regular needle. I'm going to order some!
10-03-2017, 08:10 PM
#19
Power Poster
Thread Starter
Join Date: Jul 2017
Location: Central Ohio
Posts: 15,236
I got the following response:
Wow.
The design of the Spiral Eye is meant to lock the thread inside the eye as you stitch.... Let me ask some questions.
Are you left handed.? (Lefties seem to have more issues for some reason so I always ask that first)
When you stitch do you pull the thread horizontally or do you make a u shaped upward movement? That has been a reason for uthreading...must cause the thread to loosen at just tge right time when the needle is turned. Some people who do this movement find they need to hold the needle at the eye when they pull. That means their fingers kind of pinch over the eye when they pull.
Does it come unthreaded all the time or just at a specific point?
As to the sheding..that can be caused from that can be from a few reasons.
The first would be around the thread. Because the eye of my needle hast to be cut vs. Stamped it is possible the tumbling and recurring process did not knock off the edge good enough or it left a burr inside of the eye. Either way, you can try threading dental floss through the eye and sewing a few stitches to see if you can smooth it out. This is not a common problem but I have heard of it a few times.
Or it could be the thread. Are you using a silk thread or some other delicate thread? That combined with a burr would explain it.
Please let me know if my suggestions don't help.
Pam
My response:
I'm not left-handed. The thread comes out when I insert the needle in the fabric. I was using regular sewing thread. I use a running stitch.
Gay- I only bought one needle so I don't have another to compare it to.
I'm going to try her suggestions.
Wow.
The design of the Spiral Eye is meant to lock the thread inside the eye as you stitch.... Let me ask some questions.
Are you left handed.? (Lefties seem to have more issues for some reason so I always ask that first)
When you stitch do you pull the thread horizontally or do you make a u shaped upward movement? That has been a reason for uthreading...must cause the thread to loosen at just tge right time when the needle is turned. Some people who do this movement find they need to hold the needle at the eye when they pull. That means their fingers kind of pinch over the eye when they pull.
Does it come unthreaded all the time or just at a specific point?
As to the sheding..that can be caused from that can be from a few reasons.
The first would be around the thread. Because the eye of my needle hast to be cut vs. Stamped it is possible the tumbling and recurring process did not knock off the edge good enough or it left a burr inside of the eye. Either way, you can try threading dental floss through the eye and sewing a few stitches to see if you can smooth it out. This is not a common problem but I have heard of it a few times.
Or it could be the thread. Are you using a silk thread or some other delicate thread? That combined with a burr would explain it.
Please let me know if my suggestions don't help.
Pam
My response:
I'm not left-handed. The thread comes out when I insert the needle in the fabric. I was using regular sewing thread. I use a running stitch.
Gay- I only bought one needle so I don't have another to compare it to.
I'm going to try her suggestions.
Last edited by SusieQOH; 10-03-2017 at 08:13 PM.
10-03-2017, 08:15 PM
#20
Power Poster
Thread Starter
Join Date: Jul 2017
Location: Central Ohio
Posts: 15,236
Actually, GEMRM, the two (Sench and Spiraleye) are different. If you go to the web site: http://www.spiraleyeneedles.com/Needles.html
about mid-page down you will see an explanation of the difference. My understanding is that the self-threading needles are great for pulling down a loose thread, these others allow sewing along like a regular needle. I'm going to order some!
about mid-page down you will see an explanation of the difference. My understanding is that the self-threading needles are great for pulling down a loose thread, these others allow sewing along like a regular needle. I'm going to order some!
Thread
Thread Starter
Forum
Replies
Last Post
