think I am ready to throw this quilt out the window!
#11
Power Poster
Join Date: May 2009
Location: NY
Posts: 10,590
I agree with purpledog. I think putting it in a washing machine will cause you untold amounts of grief. It could turn your top into a mangled mess and render your batting un-usable. If soaking the wrinkled bits in a shallow pan doesn't work, soak it in the tub. If you don't have a tub, lay it out as much as you can in the shower stall and turn the shower on it. Once completely wet, let it drain then gently pull the layers apart and find someplace flat you can let them dry. Good luck!
#12
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Everyone has had one of those! If you want to persevere I would NOT take the sandwich to a commercial laundry. the washers (well any washer) is WAY too rough on an unquilted sandwich. Soak it in the tub and carefully separate the layers. You can tumble dry the layers individually if you have a gentle cycle. Hopefully you used a batting that's OK to prewash.
#13
Junior Member
Join Date: Dec 2014
Posts: 187
I have also had fighting quilts..I think we all have...it is just like your brain goes on vacation...and no matter what u do .it is wrong..i have to admit..I did throw one out...it was huge...I tore the quilting out ..2 times...spents many. Many ..hours doing that...no matter what I did it bunch some in the back..I was doing it on my home machine..I re-basted..fought with it in every way...on the 3rd quilting..same thing..I know it was just me...But I who won't tore any material..did throw it away...have to admit . It sort of haunts that I did...after taking the stitches out so many times ..the fabric gets stress..I have none many for that one and after..NEVER had that kind of trouble...
#14
It might have stretched now after sewing and ripping. Why don't you put it on the cutting mat and trim of the seam line with all the glued part and toss that, then measure your quilt side and see exactly how long it is. Also make sure the corners are square with the other borders. You might want to check the other border and see if they measure what they should.
Whenever I rip something, I usually hold the steam iron over the place and give it a burst of steam and pat it down to the ironing board, to take out any fullness . Once it is flat you and then iron it and proceed to the next area.
Whenever I rip something, I usually hold the steam iron over the place and give it a burst of steam and pat it down to the ironing board, to take out any fullness . Once it is flat you and then iron it and proceed to the next area.
#15
Super Member
Join Date: Sep 2011
Location: Carroll, Iowa
Posts: 3,507
Someone told me that you could use a steam iron or steamer to shrink the fullness out of a quilt while its on the frame. Have tried this out and it works like a charm. I use Elmer's Glue for basting my binding onto the quilt but never to baste the entire quilt. I can only feel for you with your dilemna.
#16
Senior Member
Join Date: Feb 2015
Posts: 637
Sometimes I take little breaks and do something small like a potholder or zippered pouch or pillow.
This either refreshes me so I can attack the problem or makes me not notice minor things I obsessed about before
Don't give up!
This either refreshes me so I can attack the problem or makes me not notice minor things I obsessed about before
Don't give up!
#20
Last year I made a quilt..and gave it to a dear friend. I loved the pattern so much so I decided to make myself one. Only much bigger. OMG!!! You will never believe the problems I have had. I made several blocks wrong...okay..fixed those. Then after putting all the borders on..it was ten inches longer on one side than the other. Went to my LQS and they pointed out that I didn't measure the sides. (True, enough). So I took off all three borders and started again. Well...it still has a couple of extra inches..because I couldn't fit in on with tucks, otherwise. Finally got it done. whew!! Then one night I took it down to the dining hall in my bldg. and ever so quietly...scooted three long tables together..and proceeded to glue everything together with Elmer's school glue and my iron. Have done this many times before. Works wonderfully. But evidently you are supposed to start quilting right away. I let it sit about two weeks. Yep! The glue had slipped and dried several very large wrinkle into the fabric. I actually screamed. Now I have to take it to a commercial laundry and wash the glue out so I can do it all over again. (BTW...honey...don't close that window.)
Thread
Thread Starter
Forum
Replies
Last Post