Will the Real 15 clone please stand up
#111
Nancy,
That Electra is nice. Nothing out of the ordinary about it other than it doesn't appear to have been used excessively or abused. Needs a spool pin, no big deal, and someone to love her.
ELECTRA ................. The last good car I had was a 69 Buick ELECTRA 225.
Joe
That Electra is nice. Nothing out of the ordinary about it other than it doesn't appear to have been used excessively or abused. Needs a spool pin, no big deal, and someone to love her.
ELECTRA ................. The last good car I had was a 69 Buick ELECTRA 225.
Joe
Nancy
#113
Power Poster
Thread Starter
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Well, the only thing so far out of the ordinary is that - I can not get the needle bar to move! I cleaned and oiled her, a few times - no go. That needle bar is stuck solid! No wonder they just wanted me to take that machine for $5! I have never had a machine so stuck before! I was always able to unstick even the rusted ones. This machine has no rust - had a lot of dirt, lint, but she won't budge! I took the wheel off too just checking, and pulled the bobbin casing - no go - the handwheel will not turn the needle bar!
Nancy
Nancy
Janie Doe the 15 clone was stuck too. Here is a link http://www.quiltingboard.com/vintage...r-t169127.html - maybe something in there will be of interest on getting her unstuck. Janie was stuck and wouldn't move her needle bar. We could have used a bit of heat but didn't have to. My sister lives in AZ so she puts the machine in the sun and lets the sun heat it a bit - sure enough they turn. It is best though if you can get all the dried up oil and gunk out of there. We will need to re-do Janie some time because all we did was squirt some Tri-flow on her moving parts. Hannah was pregnant at the time so we didn't want to get into anything chemical. I added some comments at the end of Janie's thing...
Last edited by miriam; 03-03-2012 at 02:13 PM.
#114
Sure Charlee, I pulled the face place, bobbin case and race, hand wheel, everything I could get off safely. That machine will not budge. I soaked it with sewing machine oil yesterday, all night, and again today. I can get a tiny bit of movement now, but it is still frozen solid!
Mowgli, is hanging in there. He cries when I leave him alone so I have to stay with him or move his bed if I come in here to the office. He had a large chunk of his femur removed - the head and neck of the femur. His body will form a 'false' socket and in about a month or 2, he will be able to run and play.
Nancy
Mowgli, is hanging in there. He cries when I leave him alone so I have to stay with him or move his bed if I come in here to the office. He had a large chunk of his femur removed - the head and neck of the femur. His body will form a 'false' socket and in about a month or 2, he will be able to run and play.
Nancy
#115
Here is a picture of Gretel, my Singer 15-30 from 1915 with it's Tiffany (Gingerbread) Decals and of my newest, which looks like a 15 clone to me. It's a White Model 65 but it is also labeled J-A15 near the serial number. When I called about the date I was told it was made somewhere between 1958 and 1960. I saw it just 2 days ago and loved the blue and white - it sews really quiet and nice. (Gretel does too!) No name yet for the new machine.
Gretel
[ATTACH=CONFIG]279351[/ATTACH]
J-A15
[ATTACH=CONFIG]279352[/ATTACH]
[ATTACH=CONFIG]279351[/ATTACH]
J-A15
[ATTACH=CONFIG]279352[/ATTACH]
#117
Ok, today we will try the blow dryer! Yesterday, DH played with the Electra for a long time. He did everything I had already done with a little force and got her to move ever so slightly - so I am thinking maybe today we will get the needle bar to move!
Nancy
Nancy
#118
Super Member
Join Date: Feb 2012
Posts: 8,091
Nancy,
Here is a trick I've used on a couple machines that were really badly gummed up. Use Hoppe's #9 gun cleaning solvent.
It's mostly kerosene with some additional ingredients. It works very well for cleaning the yellow brown oil and nicotine off of the chrome parts. And limited contact won't hurt ..... as least it hasn't hurt any of mine .... the paint or decals.
I use it mostly to removed the old oil from the presser foot and needle bar.
Joe
Here is a trick I've used on a couple machines that were really badly gummed up. Use Hoppe's #9 gun cleaning solvent.
It's mostly kerosene with some additional ingredients. It works very well for cleaning the yellow brown oil and nicotine off of the chrome parts. And limited contact won't hurt ..... as least it hasn't hurt any of mine .... the paint or decals.
I use it mostly to removed the old oil from the presser foot and needle bar.
Joe
#120
Nanchy
Thread
Thread Starter
Forum
Replies
Last Post
OurWorkbench
For Vintage & Antique Machine Enthusiasts
106
03-14-2016 04:40 PM
olebat
For Vintage & Antique Machine Enthusiasts
14
04-06-2013 03:54 PM