Go Back  Quiltingboard Forums >
  • Main
  • Help! I can't use a foot pedal >
  • Help! I can't use a foot pedal

  • Help! I can't use a foot pedal

    Thread Tools
     
    Old 08-26-2014, 03:57 AM
      #31  
    Member
     
    Join Date: Oct 2008
    Location: New Port Richey, FL
    Posts: 43
    Default

    Originally Posted by izzybelle
    Thanks to everyone who has graciously commented on my situation. My biggest problem is that I have no "real" control below my midsection--I have no balance or am not capable of controlling my butt, knees, or even back. Keep the ideas coming tho-that 's how I've solved my problems in the past-just keep trying. (My stubbornness has allowed me to do some great things in the past 20 years that I've had this disease--and I refuse to give up now!!)
    My sister is in a wheelchair from a spinal cord injury. She too, has used the machine with the foot pedal on the table. I understand how this is limiting. Short of buying a new machine with the start/stop option, which sounds very nice, maybe you can mount the foot pedal on a board, then fix it to the wall in line with your shoulder so you can lean into it. This way, you will still be able to see what you are working on, and use both hands to control your quilting. Stay stubborn, and you will master this.
    tootsie00 is offline  
    Old 08-26-2014, 04:16 AM
      #32  
    Super Member
     
    Join Date: Nov 2009
    Posts: 2,061
    Default

    I have a babylock with a stop/start button on the machine that would probably work for you. It also has a knee lift for the foot if you would be able to use that. It's optional. (I never use it). There are some machines, probably in the eight to ten year old range that you could find at a reasonable cost that would provide these options. Check out e-bay and your local quilt shop.
    lclang is offline  
    Old 08-26-2014, 04:37 AM
      #33  
    Super Member
     
    Join Date: Apr 2012
    Posts: 1,165
    Default

    I've seen some wheel chairs that have attachments or controls built it and on. Is that what you have? If so, is there a place where you could attach a small board with velcro for the pedal to use with your forearm? If not, see if someone can reverse engineer a pedal safely. Maybe a toggle switch for on off, and a dial knob for speed? It would have to use the same plug ends for the machine.
    We re-engineered the wiring in my Spitfire. I simply had rows of toggle switches on the dashboard. The law stated everything had to work (it did), the law didn't state HOW. So a good EE might be able to work something for you.

    Some colleges are interested in projects for the handicapped. I remember the Air Force Academy demonstrating a sled for the handicapped so they could enjoy skating and hockey. Developed as a research project.

    Last edited by Weezy Rider; 08-26-2014 at 04:40 AM.
    Weezy Rider is offline  
    Old 08-26-2014, 04:52 AM
      #34  
    Super Member
     
    jitkaau's Avatar
     
    Join Date: Aug 2010
    Location: Australia
    Posts: 4,116
    Default

    Perhaps you could trade in your foot operated machines on one which has an ON/OFF switch which is usually situated just above the needle.
    jitkaau is offline  
    Old 08-26-2014, 04:59 AM
      #35  
    Super Member
     
    Join Date: Sep 2012
    Location: Homosassa, FL
    Posts: 2,267
    Default

    I have a brother 9000SE that I paid $140. for on e-bay from a dealer in AL (others here have mentioned their name in the past, to early brain not fully engaged. It as the needle up/down, and button with slider for speed control so no foot peddle needed, so you can go really slow and as fast as you want. Great for piecing but you would have to GAYG as harp space is small. Have some vintage machines for that. Bought it for the 80 stitches, something my older machines didn't have but only have room for one set up so that is it at the moment.
    Carol34446 is offline  
    Old 08-26-2014, 05:19 AM
      #36  
    Super Member
     
    teacherbailey's Avatar
     
    Join Date: Feb 2010
    Location: Tucker, GA
    Posts: 2,042
    Default

    Originally Posted by izzybelle
    I really could use some ideas! I have MS. Through the years I have lost the ability to use my legs, so I'm in a wheelchair. I have a Sears Kenmore and a Juki TL 2000 which I love. I'm able to piece my blocks by setting the foot pedal on the counter by my machine and use my elbow as my "foot". Works fine, no problems. Until recently I could put the pedal on the ground and quilt my layers to my satisfaction, but now I can't even do that. Does anyone know if there is an inexpensive aid to help me? Or, if there is anyone out there able to quilt in a different way without the use of your feet?
    When I first started sewing, I used the foot pedal with my right hand and guided the fabrics with my left. Takes a little practice with that left hand but it wasn't hard, and I felt like I had more control with hand on pedal than with foot. I made several quilts this way! See if that works for you. Good Luck!
    teacherbailey is offline  
    Old 08-26-2014, 05:25 AM
      #37  
    Senior Member
     
    Join Date: Nov 2011
    Location: Cedar Hill, TX
    Posts: 430
    Default

    Don't know if this would work but I have a kidney shaped board made to lay across the arms of my chair. I use it to hold my books when reading. You might be able to lay it across your lap and put the feed control on it then use you elbow. I can some what understand you flustration since my husband spent 30 yrs in a wheelchair. He worked out many things but never got close to my sewing machine.
    helenquilt is offline  
    Old 08-26-2014, 06:38 AM
      #38  
    Senior Member
     
    Join Date: Dec 2012
    Location: N. Nevada
    Posts: 953
    Default

    I hate to say buy a new machine, but that might be the answer. My brother i-nnovis 1000 has three different ways to sew. besides the foot petal there is a knee lever and a start stop button on the machine itself. I'm sure some of the other higher end machines offer these features also. Good luck. I too admire your efforts.
    salederer is offline  
    Old 08-26-2014, 06:44 AM
      #39  
    Super Member
     
    Farm Quilter's Avatar
     
    Join Date: Mar 2010
    Location: Odessa, Washington
    Posts: 1,872
    Default

    I don't have either of your machines, but on my Janome, if I unplug my foot pedal, there is a button right above my needle that I can push to start and stop my machine...do either of your machines have that? If you have to use the pedal, could you use your shoulder? Yes, it would involve having someone make a stand that you could put one wheel of a wheel chair on to hold it steady, but you could strap your foot pedal to a board that sticks out like a flag so you could use your shoulder to depress the pedal. Having it so a wheel chair would sit on it would sit on the base would give it stability so you could push against the pedal without having the structure run away from you. If you live anywhere close, I'd build it for you!
    Farm Quilter is offline  
    Old 08-26-2014, 06:51 AM
      #40  
    Super Member
     
    quiltingeileen's Avatar
     
    Join Date: Oct 2012
    Location: Massachusetts
    Posts: 1,371
    Default

    My Janome has a start and stop button. A couple of friends that have had knee surgeries used the button method and liked it so well have not gone back to foot pedal.
    quiltingeileen is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    joobee
    For Vintage & Antique Machine Enthusiasts
    9
    04-07-2014 06:04 AM
    zozee
    Main
    12
    09-14-2013 05:19 PM
    Treasureit
    Links and Resources
    56
    07-21-2013 07:33 AM
    cminor
    Main
    56
    05-21-2013 11:16 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter