Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Treadle irons, cabinet, and machine from different sources, now one. >

Treadle irons, cabinet, and machine from different sources, now one.

Treadle irons, cabinet, and machine from different sources, now one.

Thread Tools
 
Old 04-30-2018, 01:18 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Nov 2011
Location: Cary, NC
Posts: 383
Default Treadle irons, cabinet, and machine from different sources, now one.

I finally have a treadle sewing machine. It's been a long journey, because the parts are from three different sources. The treadle irons were from a machine from 1914 or so (a Singer 127, I think). I found the irons set out for trash pick-up, attached to a cabinet literally falling apart and a machine completely rusted up. I bought a Singer 66 for peanuts a couple of years ago because insulation on the wiring was flaking off.

Last week I spotted a cabinet for sale for $30! With a bench seat! I've seen this style only occasionally, it has a treadle-type top, but wooden legs. It was in great shape. Over the weekend, I put everything together and it's running great. I used aquarium tubing for the belt.

Can anyone provide information about the cabinet shown in this thread: you have a treadle but the top is bad Seriously, any info on the cabinet would be appreciated.

Tate
[ATTACH=CONFIG]593812[/ATTACH]
Attached Thumbnails treadlea.jpg  
tate_elliott is offline  
Old 04-30-2018, 01:25 PM
  #2  
Super Member
 
Join Date: Sep 2015
Posts: 1,963
Default

It's a reasonably common cabinet, I have the seen similar with one drawer on each side, and a single drawer. I think yours is treadle cabinet No.2, they are very stable and nice running when oiled. There are a few versions of the drawer fronts, flat, rounded sides, more or less embellished. Some cabinets have a sort of drawer in the middle that tips out, others just a solid pice of wood. You have to do a bit of catalog resarch on the web and see if you can find something spot on. Model 127 came in No.2 at least.

I guess very few model 66 with the stitch length lever came as treadle, I have seen a few of the earlier version with stitch length turn knob; treadle cabinet and spoked hand wheel. If you plan to keep the arrangement a leather belt is nicer than the plastic tubing.

Last edited by Mickey2; 04-30-2018 at 01:31 PM.
Mickey2 is offline  
Old 04-30-2018, 03:24 PM
  #3  
Senior Member
Thread Starter
 
Join Date: Nov 2011
Location: Cary, NC
Posts: 383
Default

Mickey, I guess I didn't make it clear that the wooden top is not from a treadle cabinet. It came from a cabinet for an electric-powered machine. The link at the bottom of my post is to a topic that shows this type of cabinet. However, your link to Needlebar gave me the chance to find my cabinet. It is under the category "Student Electric Bases." It is the photo on the left, a "Set 401." Unfortunately, it doesn't show the years it was manufactured. Thanks.

Tate
tate_elliott is offline  
Old 05-01-2018, 04:11 AM
  #4  
Super Member
 
Join Date: Jan 2014
Location: Gaylord, MN
Posts: 3,943
Default

Looks like a new set-up.
Karamarie is offline  
Old 05-01-2018, 04:41 AM
  #5  
Super Member
 
Macybaby's Avatar
 
Join Date: Jul 2013
Location: South Dakota
Posts: 8,137
Default

What you have is the same style as the #2, just made for electric machines. I'm surprised it fit on the treadle, as Singer went to a narrower setup over the years. I found that out the hard way when I got a drip pan from a newer singer treadle and tried to put it on my older singer treadle.

It's hard to find info on the electric version because it's newer than one would think. the ones I've seen had a later Singer 15 in them (the treadle version of the 15-91, think it's the 15-89).

it's interesting that Singer when with a lot of fancier style cabinets, and then came out with this "retro" looking one.
Macybaby is offline  
Old 05-01-2018, 11:41 AM
  #6  
Super Member
 
leonf's Avatar
 
Join Date: May 2016
Location: near Topeka kansas
Posts: 4,524
Default

Glad you have a treadle to play with now.

Hmm maybe not a 66 with that thread length slide and guide for winding bobbins. Or it could be just much newer than mine.
leonf is offline  
Old 05-01-2018, 11:49 AM
  #7  
Senior Member
Thread Starter
 
Join Date: Nov 2011
Location: Cary, NC
Posts: 383
Default

Macybaby, I had looked at the link I posted above, which shows plenty of room for a treadle, then was surprised that my treadle was a tight fit. I had the top and treadle turned upside down; the treadle started in okay, but then the heads of the bolts on the side hit the drawers. Arg! I was considering moving one set of drawers over a bit, but instead I just pulled the bottom of one of the drawers over slightly and "scooched" that side of the treadle a little then repeated on the other side. It scraped the inside of the drawers just slightly, but it's out of sight.

I eventually found a reference that said that this table started production around 1949. I don't know how long it was in production.

Tate
tate_elliott is offline  
Old 05-01-2018, 11:51 AM
  #8  
Senior Member
Thread Starter
 
Join Date: Nov 2011
Location: Cary, NC
Posts: 383
Default

Leonf, according to the ISMAC serial number chart, mine is a 66 from 1947.
tate_elliott is offline  
Old 05-01-2018, 01:04 PM
  #9  
Super Member
 
leonf's Avatar
 
Join Date: May 2016
Location: near Topeka kansas
Posts: 4,524
Default

yep, much newer than mine. Thanks.
leonf is offline  
Old 05-02-2018, 06:08 AM
  #10  
Super Member
 
OurWorkbench's Avatar
 
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,258
Default

Originally Posted by tate_elliott View Post
... It is under the category "Student Electric Bases." It is the photo on the left, a "Set 401." Unfortunately, it doesn't show the years it was manufactured. Thanks.

Tate
I didn't look at needlebar, but I downloaded a picture only manual for a 411 from somewhere, but can't find the link now. It shows a wood base treadle with drawers like yours and is dated 1963. The manual that you can download from singer shows part of the cabinet for the 411. I also have a jpg of cabinets ad that I have labeled from 1951 that I may have gotten from a Yahoo group, but again can't find a link now. It only shows one drawer on each side.

Janey - Neat people never make the exciting discoveries I do.
OurWorkbench is online now  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JudyTheSewer
For Vintage & Antique Machine Enthusiasts
8
01-30-2014 03:14 PM
JaneK
Main
9
06-09-2012 04:36 PM
Monroe
For Vintage & Antique Machine Enthusiasts
12
04-27-2012 03:54 AM
cny_sewer39
Main
13
05-21-2011 08:02 PM
JaneK
For Vintage & Antique Machine Enthusiasts
3
10-27-2010 06:35 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter