Vintage Sewing Machine Shop Machine Photos
#901
Cool machine. I love the big handwheel. The cabinet looks like it is in great condition too. Are you going to treadle or use the handcrank? Both? I can't make out the name of the machine. Great find though.
~G~
~G~
#903
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
#904
Senior Member
Join Date: Jun 2012
Posts: 508
so I will try for this one instead...
http://sfbay.craigslist.org/eby/atq/3482202015.html
http://sfbay.craigslist.org/eby/atq/3482202015.html
#905
Super Member
Join Date: Dec 2011
Location: Northern CA near Sacramento
Posts: 1,107
That is a real nice W&W 9. I'd go for it if I had any more room. I have a W&W 9 hand crank that is the nicest stitcher EVER.
Cathy
Cathy
so I will try for this one instead...
http://sfbay.craigslist.org/eby/atq/3482202015.html
http://sfbay.craigslist.org/eby/atq/3482202015.html
#906
Super Member
Join Date: May 2010
Location: Round Rock,Texas
Posts: 6,135
#907
Super Member
Join Date: May 2010
Location: Round Rock,Texas
Posts: 6,135
No you don't need a model number for a treadle belt. Most all treadle belts that come pre-cut and packaged are 72"s. You will then have to measure the belt to your machine, cut it the correct length and use the little staple like thing that comes with the belt to connect the ends together. Some people on here sew their belts together with dental floss or a heavy thread. Your machine (looks like a Model 127) will use the normal pre-packaged treadle belts. Most all sewing repair shops carry those belts, as do most on-line sewing stores. Just put the belt around the treadle wheel, around your hand wheel slot, cut one end of the leather off where the two ends meet, now sew/connect together. Don't put the belt too tight, but if you find it is too lose when you start to treadle, just cut and re-sew a second time.
Nancy
Nancy
The vast majority of treadles use a belt that is a bit less than 72", but not my Pfaff treadle; its in an idustrial treadle stand. It needs about 80" if I recall correctly.
Sharon
Last edited by purplefiend; 01-17-2013 at 04:42 AM.
#909
I sew my treadle belts with dental floss and a large eye tapestry needle, it all started cuz I got frustrated over the staple breaking. There's no tick,tick noise of the staple when you sew them.
The vast majority of treadles use a belt that is a bit less than 72", but not my Pfaff treadle; its in an idustrial treadle stand. It needs about 80" if I recall correctly.
Sharon
The vast majority of treadles use a belt that is a bit less than 72", but not my Pfaff treadle; its in an idustrial treadle stand. It needs about 80" if I recall correctly.
Sharon
Cathy, I have always said that the Wheeler and Wilson's are the aristocrates of the sewing machine world! But, Steve, remember that on a W&W the hand wheel turns the opposite way of the Singer (and most vintage machines) wheel!
Nancy
#910
No you don't need a model number for a treadle belt. Most all treadle belts that come pre-cut and packaged are 72"s. You will then have to measure the belt to your machine, cut it the correct length and use the little staple like thing that comes with the belt to connect the ends together. Some people on here sew their belts together with dental floss or a heavy thread. Your machine (looks like a Model 127) will use the normal pre-packaged treadle belts. Most all sewing repair shops carry those belts, as do most on-line sewing stores. Just put the belt around the treadle wheel, around your hand wheel slot, cut one end of the leather off where the two ends meet, now sew/connect together. Don't put the belt too tight, but if you find it is too lose when you start to treadle, just cut and re-sew a second time.
Nancy
Nancy
Thread
Thread Starter
Forum
Replies
Last Post
Lostn51
For Vintage & Antique Machine Enthusiasts
44789
01-17-2016 05:34 AM
Caroline94535
For Vintage & Antique Machine Enthusiasts
4
07-03-2015 07:29 PM
Candace
For Vintage & Antique Machine Enthusiasts
14
12-09-2013 07:55 AM
danandsassy
For Vintage & Antique Machine Enthusiasts
17
05-14-2011 06:26 AM