Vintage Sewing Machine Shop.....Come on in and sit a spell
Weedwoman --- I think I have the screw you need for your clutch nut. PM me.
Kathy S., So sorry for your lose.
Hi, Kathie -- Please accept my condolences on the loss of your sister-in-law. My mother (age 96) has terminal cancer -- so I am very empathetic..
Your Jones machine is elegant! Such sophisticated lines! I also LOVE the decal work on your New Home. You really hit the jackpot! Have fun with them all!
Your Jones machine is elegant! Such sophisticated lines! I also LOVE the decal work on your New Home. You really hit the jackpot! Have fun with them all!
Originally Posted by Miz Johnny
Originally Posted by Crossstitcher
Farmstitcher, I have a reg. 306 machine and it takes the 206X13 needle which you can still find. This machine will also use a double needle. I am going to list some of the features of my 306 and maybe
We kind of it will be the same as what you are looking at.
. . . . I like mine but don't know if I want to treadle it also have another one DH is going to put a hand crank on it. Here's a picture of mine.
We kind of it will be the same as what you are looking at.
. . . . I like mine but don't know if I want to treadle it also have another one DH is going to put a hand crank on it. Here's a picture of mine.
Junior Member
Join Date: May 2011
Posts: 192
Anyone know anything about a White model NAZ. Seen one at a local thift shop?
Originally Posted by Kathie S.
I want to thank each and everyone of you that have prayed for me and hubbys family. His sister just passed away. Kathie
Nancy
Junior Member
Join Date: Mar 2011
Posts: 113
Kathie I want to add my condolences too. Know what you are going through.
Bronwyn
Bronwyn
Kathie S.,
Deepest sympathy for you and your husband's family.
Melinda
Deepest sympathy for you and your husband's family.
Melinda
Originally Posted by Crossstitcher
Farmstitcher, I have a reg. 306 machine and it takes the 206X13 needle which you can still find. This machine will also use a double needle. Full vision bobbin case,calibrated tension for accurate adjustment,reversible feed,calibrated stitch regulator,smooth seamless throat plates,positive feed for handling all types of fabrics,oneway needle clamp makes it almost impossible to place needle in clamp incorrectly,takes the fashion discs for making decorative stitches.
Originally Posted by sewnserge
Hi Nancy -
Wow!! You sound so excited! Thanks!!! :wink: Yes it is a Model 15, and the lever is a back tack. Do you have any suggestion for how to lower the feed dogs?? I was hoping I could use it for FMQ, because it has such a long arm...10-1/4"! It has cleaned up fairly well -- it has been ridden hard--has multiple dings and nicks, and tons of scratches where they put their pins in a strap of fabric they wrapped around the arm. There was a decal, but only a tiny bit is visible -- I can see the S from the Singer decal on the arm, and there is a little bit of decorative scrolling on the upright--but it is mostly gone.
Wow!! You sound so excited! Thanks!!! :wink: Yes it is a Model 15, and the lever is a back tack. Do you have any suggestion for how to lower the feed dogs?? I was hoping I could use it for FMQ, because it has such a long arm...10-1/4"! It has cleaned up fairly well -- it has been ridden hard--has multiple dings and nicks, and tons of scratches where they put their pins in a strap of fabric they wrapped around the arm. There was a decal, but only a tiny bit is visible -- I can see the S from the Singer decal on the arm, and there is a little bit of decorative scrolling on the upright--but it is mostly gone.
Anyway, there should be thumb screw under the bed when you tip the machine up that will drop the feed dogs for FM quilting if in fact the very early ones had that capability! I have a Model 15-88 treadle that does drop its feed dogs with that thumb screw on the under side of the bed right next to the bobbin hook race.
Nancy
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM