Vintage Sewing Machine Shop.....Come on in and sit a spell
Originally Posted by SewExtreme
Nancy
Originally Posted by lee231
For those of you that have the Two spoolers, what is a going price for them?
Nancy
Originally Posted by jljack
Originally Posted by vintagemotif
Originally Posted by Charlee
Oh wait...I kinda sorta hafta sew a quilt top to do that, huh?
Don't you need to make a quilt top and bottom and at least spray baste them to the batting!!
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Originally Posted by nickylsf
In my zeal to oil my recently acquired 301A, I put sewing machine oil in the motor tube, and then learned I should have used lubricant. I got some lubricant and tried to put that in, but it did not seem as though there was room to put any in. What should I do?
http://parts.singerco.com/IPsvcManuals/306W25.pdf
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Originally Posted by SewExtreme
Originally Posted by jljack
Originally Posted by Charlee
I'm dying to try FMQ on a treadle, I just don't have one that drops the dogs....BUT!! I can use a buttonholer cover!! :D
Oh wait...I kinda sorta hafta sew a quilt top to do that, huh?
Y E S!!! Charlee, making a top comes before the FMQ!!! Nearly every time, as far as I know!! LOL LOL :lol: :lol:
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Originally Posted by quilt addict
I got a good deal this weekend I think. I will have to put pictures up later. But I got a FW card table but the top is in tough condition. I want to restore it but was not sure how to proceed.
On the top there are just a few areas here and there of coating left and it is crazed. The wood seems in good condition with just a small place where the veneer is gone next to the part that is removed. But the veneer is lifting just a bit around a good portion of the outer edges.
Should I take the whole top piece out of the wooden frame and then try to put a bit a glue with clamps on it before I try to refinish?
What finish would you use, shellac or varnish? I think the old finish will come off easily with a quick rub from steel wool. Should this be my first step?
I think I can just lightly sand the frame and legs and repaint with black. Although the black paint is not bad, just rubbed a bit on some edges. The leg brackets have a bit of rust so can try to clean those up too.
Glen I hope you don't mind helping with your expertese. I hope to post some pictures tonight.
On the top there are just a few areas here and there of coating left and it is crazed. The wood seems in good condition with just a small place where the veneer is gone next to the part that is removed. But the veneer is lifting just a bit around a good portion of the outer edges.
Should I take the whole top piece out of the wooden frame and then try to put a bit a glue with clamps on it before I try to refinish?
What finish would you use, shellac or varnish? I think the old finish will come off easily with a quick rub from steel wool. Should this be my first step?
I think I can just lightly sand the frame and legs and repaint with black. Although the black paint is not bad, just rubbed a bit on some edges. The leg brackets have a bit of rust so can try to clean those up too.
Glen I hope you don't mind helping with your expertese. I hope to post some pictures tonight.
Glenn
Nickylsf, I love your Wheeler & Wilson machine. Very cool! :-D
Banned
Thread Starter
Join Date: Oct 2009
Location: Bikini Bottom
Posts: 5,652
Originally Posted by QuilterGary
Billy
Originally Posted by Miz Johnny
Yep, our only choices were Home Ec and foreign languages. I took Latin. Best choice I ever made.
Charlee, you are younger than I am. No possibility of woodshop for me :-( Ah, well :lol: :lol:
Originally Posted by Quilt Mom
Originally Posted by Charlee
:lol: I couldn't stand the old snag that taught Home Ec...I took woodshop instead!
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM