Vintage Sewing Machine Shop Machine Photos
#761
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
#762
Nancy
Last edited by BoJangles; 12-06-2012 at 05:14 AM.
#763
ok, getting the thread back on track.. (my bad)
here is a pic of my favorite desktop singer.
[ATTACH=CONFIG]379909[/ATTACH]
and a video
https://dl.dropbox.com/u/18576541/model20electric.mp4
if the link fails let me know. it's a 15.8mb file
or
https://skydrive.live.com/?cid=10c9d...4&action=Share
If nothing else, this one lets you download it.
here is a pic of my favorite desktop singer.
[ATTACH=CONFIG]379909[/ATTACH]
and a video
https://dl.dropbox.com/u/18576541/model20electric.mp4
if the link fails let me know. it's a 15.8mb file
or
https://skydrive.live.com/?cid=10c9d...4&action=Share
If nothing else, this one lets you download it.
Nancy
Last edited by BoJangles; 12-06-2012 at 05:21 AM.
#764
Hi everyone,
Sorry its been so long since I posted last, been ill with MRSA; its all cleared up now. Yippee!!!
Today I finally found more bobbins for my Pfaff 60 treadle. It takes a class 15 bobbin, but it has to have a slit in the bottom of the bobbin so that the pin on the bobbin winder will engage properly. I thought that part was broken, until today I got a good look at the only bobbin that came with it. I'd been using Singer class 15 or old Bernina bobbins and they work fine to sew with, but not to wind a new bobbin. My local Pfaff dealer worked with me and gave me several bobbins to try out.
Currently making Bonnie Hunter's latest mystery quilt with the Pfaff treadle, "Easy Street". No more triangle points being gobbled by the greedy Pfaff 1222E electric zig zag.
SteveH,
Congrats on being a Grandpa. I love the White Rotary too!
treadling happily in central Texas,
Sharon W.
Sorry its been so long since I posted last, been ill with MRSA; its all cleared up now. Yippee!!!
Today I finally found more bobbins for my Pfaff 60 treadle. It takes a class 15 bobbin, but it has to have a slit in the bottom of the bobbin so that the pin on the bobbin winder will engage properly. I thought that part was broken, until today I got a good look at the only bobbin that came with it. I'd been using Singer class 15 or old Bernina bobbins and they work fine to sew with, but not to wind a new bobbin. My local Pfaff dealer worked with me and gave me several bobbins to try out.
Currently making Bonnie Hunter's latest mystery quilt with the Pfaff treadle, "Easy Street". No more triangle points being gobbled by the greedy Pfaff 1222E electric zig zag.
SteveH,
Congrats on being a Grandpa. I love the White Rotary too!
treadling happily in central Texas,
Sharon W.
Nancy
#765
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
OK, So I really want to start the process to make this part, I would also really like to ask for some assistance here.
1. We are talking about the little cast metal "dogbone" looking thing that some early electrified machines use which allows the motor to swing from "in use" mode where a wheel on the motor shaft is in contact with the handwheel to "in storage" mode where it swings into the space under the arm.
2. The only one I have currently is cracked into two pieces. one half is currently "fused" to the motor side. I am PB Blaster'ing the screw that holds it.
3. Does anyone have one that is removable?
a. If so can I get a series of photos of it with a ruler next to it?
b. could I borrow one from someone to make a mold and at cast a resin model
1. We are talking about the little cast metal "dogbone" looking thing that some early electrified machines use which allows the motor to swing from "in use" mode where a wheel on the motor shaft is in contact with the handwheel to "in storage" mode where it swings into the space under the arm.
2. The only one I have currently is cracked into two pieces. one half is currently "fused" to the motor side. I am PB Blaster'ing the screw that holds it.
3. Does anyone have one that is removable?
a. If so can I get a series of photos of it with a ruler next to it?
b. could I borrow one from someone to make a mold and at cast a resin model
#766
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
According to page 3 of the "Adjusters manual for Model 20's" it says Model 20-1 and 20-10 are hand crank, Model 20-2 is an Electric.
She ALWAYS gets "oohhhh's and Ahhhh's when I hit the switch, even from other Guys. The line is invariably "Ok, so THAT is cute..."
What amazed me is that fact that the original plug and cord are in incredible shape. The cord feels like fresh rubber. It feels like it came out of a time machine.
The ONE negative is that it is currently using a rubber o-ring as a drive belt. I have seen an OLD photo and it looked like the original belt was a square profile. NO idea what material, I assume rubber.
Last edited by SteveH; 12-06-2012 at 09:26 AM.
#767
Super Member
Join Date: Dec 2011
Location: Northern CA near Sacramento
Posts: 1,107
Steve,
If I'm understanding you, I have this piece on a machine. Are you coming to the TOGA on saturday? If so, you can check it out then.
Cathy
If I'm understanding you, I have this piece on a machine. Are you coming to the TOGA on saturday? If so, you can check it out then.
Cathy
OK, So I really want to start the process to make this part, I would also really like to ask for some assistance here.
1. We are talking about the little cast metal "dogbone" looking thing that some early electrified machines use which allows the motor to swing from "in use" mode where a wheel on the motor shaft is in contact with the handwheel to "in storage" mode where it swings into the space under the arm.
2. The only one I have currently is cracked into two pieces. one half is currently "fused" to the motor side. I am PB Blaster'ing the screw that holds it.
3. Does anyone have one that is removable?
a. If so can I get a series of photos of it with a ruler next to it?
b. could I borrow one from someone to make a mold and at cast a resin model
1. We are talking about the little cast metal "dogbone" looking thing that some early electrified machines use which allows the motor to swing from "in use" mode where a wheel on the motor shaft is in contact with the handwheel to "in storage" mode where it swings into the space under the arm.
2. The only one I have currently is cracked into two pieces. one half is currently "fused" to the motor side. I am PB Blaster'ing the screw that holds it.
3. Does anyone have one that is removable?
a. If so can I get a series of photos of it with a ruler next to it?
b. could I borrow one from someone to make a mold and at cast a resin model
#768
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
Saturday I will be (hopefully) driving into SF to buy a Singer 241-12 and then going to my company's holiday party.
#769
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
Saturday I will be (hopefully) driving into SF to buy a Singer 241-12 and then going to my company's holiday party.
[ATTACH=CONFIG]380516[/ATTACH]
#770
Super Member
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,835
OK, So I really want to start the process to make this part, I would also really like to ask for some assistance here.
1. We are talking about the little cast metal "dogbone" looking thing that some early electrified machines use which allows the motor to swing from "in use" mode where a wheel on the motor shaft is in contact with the handwheel to "in storage" mode where it swings into the space under the arm.
2. The only one I have currently is cracked into two pieces. one half is currently "fused" to the motor side. I am PB Blaster'ing the screw that holds it.
3. Does anyone have one that is removable?
a. If so can I get a series of photos of it with a ruler next to it?
b. could I borrow one from someone to make a mold and at cast a resin model
1. We are talking about the little cast metal "dogbone" looking thing that some early electrified machines use which allows the motor to swing from "in use" mode where a wheel on the motor shaft is in contact with the handwheel to "in storage" mode where it swings into the space under the arm.
2. The only one I have currently is cracked into two pieces. one half is currently "fused" to the motor side. I am PB Blaster'ing the screw that holds it.
3. Does anyone have one that is removable?
a. If so can I get a series of photos of it with a ruler next to it?
b. could I borrow one from someone to make a mold and at cast a resin model
Jon
Thread
Thread Starter
Forum
Replies
Last Post
Lostn51
For Vintage & Antique Machine Enthusiasts
44789
01-17-2016 05:34 AM
Caroline94535
For Vintage & Antique Machine Enthusiasts
4
07-03-2015 07:29 PM
Candace
For Vintage & Antique Machine Enthusiasts
14
12-09-2013 07:55 AM
danandsassy
For Vintage & Antique Machine Enthusiasts
17
05-14-2011 06:26 AM