|
Originally Posted by Kathie S.
I just bought another sewing machine for $40. It is a 1942
Singer knee peddle. It is in great shape. It is black matte crinkle finish. It is in a portable cabinet with out the key. :cry: It is a little noisey but I think it may just need to be oiled. I need a throat plate for it. I have plently of bobbins that will fit, but no plate to cover them. It seems to be clean but have not checked it out yet. Have a wonderful day. Kathie |
Originally Posted by irishrose
Kitsone, that will be a gorgeous machine cleaned up. I love the mother of pearl inserts.
My little Leader came home with me. She is tiny. I have part of a book and it does say 10M-3' 28 Irwin Part of different book says 3M-J '28 Irwin, so I think it must be 1928. I have a huge box of attachments - I may have the ruffler I want, though I'd rather have one for the 301. Two wooden boxes of needles. They are 1/4" longer that a 15x1. I hope I can round up some family to bring her in tomorrow. It's hard to hide my new addiction when I need help lifting this one. The kids loaded her face down and it's bugging me. I did pack her with heavy duty bubble wrap inside and a bungee cord and blankets outside. Yes, it fit in my car's trunk without any trouble. Close on the depth, but plenty of space on the ends and side. |
Originally Posted by luv2learn
Hello everyone!
I haven't been posting much lately, just reading and learning and loving the machine parade! It just gets better with each passing day!! Thanx to everyone for sharing! I hope I have't made the information sound as confused as I am. . . but here are my questions for anyone who can help. When I got my Redeye treadle, she wouldn't advance the fabric while stitching. . She would only stitch in place. I was hoping after the cleanup she would improve, but after finishing Billy's tute she looks beautiful, but has the same problem. Since this was my first try at all of this, I have tried different adjustments as I have read info here, when someone else asks other questions that I thought might relate to my problem. One day I was able to get a very small stitch, (it was comparable to about what a 1.5 would be on my computerized electric machines. The stitch was very pretty and consistent but I felt it needed to be just a little bit longer and whatever changes I made, either lost the motion completely or went back to the super short stitch). I'm hoping I have just not got the right combination of settings between the things I have adjusted, or a particular order of adjustments. Is there something specific I need to do? Or could the problem be that my feed dogs are too worn? (But if it's the feed dogs, would I have been able to achieve that tiny stitch momentarily?) With the presser foot down and the needle up, just to see what kind of pressure is there, if I try to slide the fabric under the foot, it slides back and forth freely, or either won't move at all, can't seem to find the in-between constant. Here are the adjustments I have tried changing at different intervals. .: 1.The position and amount of pressure on the presser bar and foot, (using the knob on top, and the little screw inside that puts tension on the bar) 2. How tight the presser foot lifter is. 3. The stitch regulator knob, which doen't seem to change the stitch much for the amount of space it screws in and out. Do I just need to continue fidgeting with it until I get her to make that tiny little stitch and be happy with that? What is the LONGEST feasible stitch I should expect from her? What other things could I try? Oh, also the belt is not on her, I am just hand wheeling her. . . could THAT be a contributor to the problem? (Though if she was a handcrank would that matter?) Thanx in advance, I know there's a lot of knowledge out there. Brenda |
Kitsone, I had no concerns about the machine fitting in the trunk You could put three bodies in a full size Buick's trunk. The seller was worried yesterday, but she drives a Ford Focus.
My great grandson's team was not the winnng team today which means they are second in the state in class C. Not bad for a small country school in the farm country East of here. |
I had the same problem with my Alvah when I got it (and the machine was a grimy mess)! I thought it was all kinds of things. I felt so silly when I fixed it. Hopefully your fix will be as simple.
Here are some suggestions: #1 Clean the area with the feed dogs and be sure all sections of linkage are oiled all the way back to the stitch length adjustment. #2 Move the stitch length adjustment to the largest you can get. #3 Try again with the fabric, especially a thick set. #4 If no difference, slide the adjuster back and and forth to ensure everything is moving. #5 Try again. Your feed dogs should move fabric regardless if the needle or bobbin have thread. My machine's lower end was dry and full of lint. Cleaning and lubing made a HUGE difference. Umm... Adjusting the stitch length helped too. |
Originally Posted by Kitzone
Originally Posted by Kathie S.
I just bought another sewing machine for $40. It is a 1942
Singer knee peddle. It is in great shape. It is black matte crinkle finish. It is in a portable cabinet with out the key. :cry: It is a little noisey but I think it may just need to be oiled. I need a throat plate for it. I have plently of bobbins that will fit, but no plate to cover them. It seems to be clean but have not checked it out yet. Have a wonderful day. Kathie |
Originally Posted by BoJangles
Originally Posted by Lostn51
As far as Featherweights go I have yet to give over $100 for one. In fact the last 3 that I bought to keep in my collection (never happened) was bought for less than $30 each. So the cheap deals are out there, but I would opt for a 301 while they are affordable. I have been watching the prices of those jump and they look to be passing the FW soon.
Billy Nancy Billy |
Originally Posted by Kitzone
Originally Posted by Lostn51
Originally Posted by Kitzone
Thought I'd share another project.... 1873 Singer Mother of Pearl - Handcrank. I need some patience or she's going to see Uncle Billy in Bikini Bottom :)
Judy Billy<<<<Who has a super soft spot for MOP 12's Billy |
Originally Posted by Kathie S.
I just bought another sewing machine for $40. It is a 1942
Singer knee peddle. It is in great shape. It is black matte crinkle finish. It is in a portable cabinet with out the key. :cry: It is a little noisey but I think it may just need to be oiled. I need a throat plate for it. I have plently of bobbins that will fit, but no plate to cover them. It seems to be clean but have not checked it out yet. Have a wonderful day. Kathie Nancy |
Thank you guys for the suggestions thus far. . .
In response, Billy, I had that area open when I did your tute. I tried to clean real good when in the kerosene bath, but not knowing what it SHOULD look like at the time, there certainly could be something wrong. I will check what you said about the stitch regulator, put some more oil in the proper spots and get back to you. . . Kitzone, there is a before cleanup photo of her on page 594, but I will post some closeups of the after so you can maybe see what you are looking for. . . and redbugsullivan, the feed dogs move, but I'll doublecheck to see if there's more goop that I may have missed. . . I will add some more photos tomorrow so you guys can help me make her well Thanx again. . . Brenda |
| All times are GMT -8. The time now is 11:30 PM. |